-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
cva hawken pistol
- Thread starter buzz bait
- Start date
Help Support Muzzleloading Forum:
If you are handy with jewelers files, you could file a narrow slot in the wedge and use a small pin to keep it from comming all the way out. I did that on my shotgun. Or you can get them at TOTW
Barrel wedges
Barrel wedges
buzz bait said:i got one last year and shoot it a lot .the only problem i have it is when i pull the ram rod out to load it the wedge pin falls out .doe,s anyone own one and has the same problem
You can bend the wedge a little bit and it will stay put better . Also like Liver said you can (capture your wedge ) and not loose it . I use a Dremel tool and cut a slot in the wedge length wise and use a small wire through it under the wedge plate,You will need to cut a little wood out for the capture pin .
Slenk
