• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SOLD CVA Mountain Rifle in .45

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Aug 25, 2007
Messages
3,752
Reaction score
5,480
REDUCED This is a decent CVA Mountain Rifle in .45. It has the 4 screw patchbox and barrel marjed MADE IN USA. The 32" barrel was left in the white and has a dull freckled patina. Bore is very good. Twist is 1:66. Stock is in very good condition with minimal handling marks. LOP is 14" and rifle weighs 8lbs. $350 + Shipping.
20240531_112926.jpg
20240531_113051.jpg
20240531_113103.jpg
20240531_113002.jpg
20240531_113029.jpg
20240531_112754.jpg
20240531_112731.jpg
20240531_093649.jpg
20240531_112814.jpg
20240531_112426.jpg
 
Last edited:
I have one exactly like this, 65gn of 3f under a .440 ball is boringly accurate at 50 yards.
 
I have two USA in .50, one is an unfired factory job. The other, my first BP and a kit to boot, has 70+ pounds of Goex shot through it. Still groups 2" at 50 with my 73 year old eyes. I gave my older son a USA .45 30-some years ago. It groups better than my .50.

Fair price. Whoever goes home with this will be happy.
 
Those USA made CVA's are tack drivers - I've had experience of a few - including the 2 piece stock 'Kentucky' all have shot really well. We did encounter a 50 cal Mountain Rifle where the bore must have been 'bent' inside the barrel - shot way off to one side - being in NZ there was no chance to send it; back so we bent the barrel in a jig, looked a bit weird but shot beautifully.
 
Status
Not open for further replies.
Back
Top