Here are just a couple of their wonderful Youtubes. Lots to look at. I was quite taken by the device for holding smoldering match.
\
\
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Dale mentioned the Matsumoto Castle Gun Corps
- Thread starter BillinOregon
- Start date
Help Support Muzzleloading Forum:
- Joined
- May 24, 2005
- Messages
- 5,028
- Reaction score
- 4,436
Thanks Bill. Very cool videos. Yes, the device for holding match cord is neat. Notice in the gun shop how they easily remove and replace the breech plugs. The plugs have course threads and just snug flush with the breech face of the barrel. But, the plug is much longer than on European barrels with fine threads and a shorter plug that has a crush value. Just a different way to accomplish the same thing.
What I did on my original jap shooter - I added some high temperature thread sealer that they use for spark plugs in autos. The sealer never actually hardens. So it's still easy to remove the plug if needed.
Rick
What I did on my original jap shooter - I added some high temperature thread sealer that they use for spark plugs in autos. The sealer never actually hardens. So it's still easy to remove the plug if needed.
Rick
