do you recognize this cannon?

[BlackPowderKeg]

consider getting this canon but not sure if it's something original or made up item, all opinions welcome

 

[Rich44]

Looks to me like someone had a likening for cannons and used their skill and imagination in making this cannon.
But the cannon displays a very rough life, it sure could use a good new home, Good Luck

 

[Codger Craig Wilcox]

Looks similar to a 6-pound Naval gun, but honestly never saw one without the carriage.

 

[2 shots]

HEX NUTS SAY NOT OLD.

 

[LECook]

I'd say you found a good size toy cannon. The side pieces are cast iron as were the broken wheels. You could probably find a pair of wheels that would match the style of the carriage.

With the press fit or possibly cast on trunnion band, the barrel could be steel rather than cast iron. Otherwise it would have been cast as a whole, trunnions and all.

It probably dates to the latter part of 19th century. Hex nuts and bolts have been around since the early 19th century so that puts it made sometime in the last 200 years.

Nice find. What is the bore diameter?

 

[BlackPowderKeg]

got it home, used wire brush, here's what I found out

 

[LECook]

Very Cool !!

Now to decide on how far to take the restoration. Do you want it to look it’s age or as new. Personally I like antiques, especially iron, to look aged.

Enjoy your project.

 

[BlackPowderKeg]

well at this point i'm trying to understand what it is and collect data, any idea folks?

 

[springfield art]

consider getting this canon but not sure if it's something original or made up item, all opinions welcome

View attachment 354220View attachment 354221View attachment 354222View attachment 354223

I agree with Rich44; It is quite old, but not a true actual military issue anything. I'd buy it if I were you, but you might find it's best as a decorative item. The heavy pitting would be removed with sand blasting but any paint applied would show the pits. It's neat!

 

[revo3.3]

One of general forrests pups !

 

[Loyalist Dave]

I'd say you found a good size toy cannon. The side pieces are cast iron as were the broken wheels. You could probably find a pair of wheels that would match the style of the carriage.

With the press fit or possibly cast on trunnion band, the barrel could be steel rather than cast iron. Otherwise it would have been cast as a whole, trunnions and all.

It probably dates to the latter part of 19th century. Hex nuts and bolts have been around since the early 19th century so that puts it made sometime in the last 200 years.

Nice find. What is the bore diameter?

I'd disagree on the description "toy", but the rest I do agree with. I'd suggest the term "replica" because I think that it was made for a memorial display or decorative display. It likely went atop a stone or concrete pedestal, perhaps private. The stuff that one sees is normally bronze, and gets that odd gray/green color of bronze, so I'm guessing either a small community park, or a private park, OR...perhaps..., it was one of two, each set on a pedestal on either side of a gate on private property. The new owners may have changed over to lions or some sort of finial after removing the canon, not wanting a martial theme to the entrance to their property. IF it was a small community public item, there has been a recent wave of elimination when it comes to Confederate markers of any kind other than actual graves, so perhaps it was removed for that reason, or even merely damaged having been on a rather low platform and a person came along with a car and alcohol was involved (note how one of the remaining wheel-spoke-stubs is bent), and the owner(s) simply sold it for scrap.

LD