Does anybody know this guy?

[Gooddaytoya!]

I was studying different ways to Brown my barrel, and I found what I would like to do on a YouTube vid. The guy calls himself Isaac Haines of Lancaster County (Pennsylvania), after the famous Isaac Haines of the 1700s. It might be a stage name for his video. He has a pretty strong German accent and I couldn't understand what he said when he named the products he was using. It's a rust browning system that comes in small bottles and is brushed on, allowed to rest for a short time, then steel wooled, then coat it again etc four more times with the last time being allowed to rust overnight. No special humidity setups. But I can't track down this product. The vid was called "Long rifle build Lancaster PT. 47 project browning". It's part of a series showing him build a fine muzzleloader. I'd really like to use that particular Browning system. Would anybody take the time to look up that video and try to figure out the name of that product? If it's illegal in the State of California, I'll have it sent to Reno Nevada which is about one and a half hours from me. Many thanks to anyone who dares to do this huge favor for me.

 

[deerstalkert]

go down to the comments and replies. he gives a link to the supplier

 

[springfield art]

I was studying different ways to Brown my barrel, and I found what I would like to do on a YouTube vid. The guy calls himself Isaac Haines of Lancaster County (Pennsylvania), after the famous Isaac Haines of the 1700s. It might be a stage name for his video. He has a pretty strong German accent and I couldn't understand what he said when he named the products he was using. It's a rust browning system that comes in small bottles and is brushed on, allowed to rest for a short time, then steel wooled, then coat it again etc four more times with the last time being allowed to rust overnight. No special humidity setups. But I can't track down this product. The vid was called "Long rifle build Lancaster PT. 47 project browning". It's part of a series showing him build a fine muzzleloader. I'd really like to use that particular Browning system. Would anybody take the time to look up that video and try to figure out the name of that product? If it's illegal in the State of California, I'll have it sent to Reno Nevada which is about one and a half hours from me. Many thanks to anyone who dares to do this huge favor for me.

Just google gun browning solutions; there's more than one. They often require heating the barrel with a torch, and can be easier to use than when you have to build a humidity tent, etc. Good luck! Check Brownell's or the muzzleloading dealers that put ads in Muzzle Blasts or Muzzleloader. I like the brown finish a lot.

 

[Dale Lilly]

Laurel Mountain. Cold browning. Nothing much better. Follow their instructions. Polecat

 

[Gooddaytoya!]

Laurel Mountain. Cold browning. Nothing much better. Follow their instructions. Polecat

 

[Gooddaytoya!]

Thanks a whole lot guys!

 

[gooddy51]

Just google gun browning solutions; there's more than one. They often require heating the barrel with a torch, and can be easier to use than when you have to build a humidity tent, etc. Good luck! Check Brownell's or the muzzleloading dealers that put ads in Muzzle Blasts or Muzzleloader. I like the brown finish a lot.

I second this

 

[Eric Krewson]

LMF here, never used anything else, takes a lot of coats and some time but I get very good results. I broke the rear trigger trying to cold bend it a little, I put a scarf joint on the metal and used low temp solder to put it back together. I bought a new trigger but this works so well I may never get around to replacing my patched one.

 

[ohio ramrod]

For browning I like Coco cola. Yea things do go better with coke!.I degrease the part and soak over night. Simple,easy and non toxic.

 

[Woody Morgan]

For browning I like Coco cola. Yea things do go better with coke!.I degrease the part and soak over night. Simple,easy and non toxic.

I'd argue the "non-toxic" aspect of that swill.

wm

 

[EC121]

I have found it easier to quit browning and just use cold blue. It eventually fades or wears off and looks nice.