I have heard that stated as a game changer in the past. Actually Pedersoli had nothing to do with the these pistols they were all made by Uberti who had access to the originals. The brass forend weights were added after the guns left Wogdon's shop. Probably a decade or so later and reflect the change in attitude toward dueling pistols. I have owned and shot two sets of these pistols. After the screw was added the bores were lapped and the screw has no effect whatsoever on anything except as a point of contention among modern day experts. I believe that Uberti duplicated the method of attachment on the originals. Remember he was being paid a considerable sum to exactly replicate the originals which he had in hand at the time and I doubt he would have jeopardized that commission over so simple a matter. If it matters to you fine but you will never be able to duplicate the quality of these pistols in todays world at the prices they sell for.
The gunsmith who attached the weights unfortunately is lost to history but likely was a gunsmith living in the colonies. Keying the brass to the barrel would not have been a secure manner of attachment. The brass stays with the barrel on dismount for cleaning and as I mentioned previously the barrel is polished internally and the screw is almost invisible and not a point for corrosion with competent cleaning. While it hasn't been mentioned the original wooden ram rods have also been replaced with tapered steel rods that further secure the barrel to the stock. The set by Uberti represent the pistols as they were when borrowed from the Church family by Hamilton for the duel.I guess the answer to the question I raised lies in the original Wogdon pistols. I have inspected, handled and shot a fair number of original duellers, both flint and percussion, and currently own and shoot a J.Probin "Maker to His R. H. the Prince of Wales" 20 bore flint dueller. In no other case have I ever found any unnecessary holes into the bore, and do not believe any contemporary gunmaker would have fitted such an attachment to the Wogdon pistols in the observed manner. The original Wogdon stock was, as is customary, keyed to the barrel, and the weight could have been (should have been) attached in the same way to the existing barrel lug. My objections are to poor practice, and the fact that duellers, in common with higher grade arms of the time, were made to be easily dismounted for proper 'washing-out', which would apparently be very difficult in the case of the foreend weight attached by a screw into the bore. In addition, the screw hole would almost certainly be a seat for corrosion and, with continued use, damage to the patch, if not a safety problem. Perhaps someone knows the facts of the original pistols' construction, and can solve the puzzle definitively. Mr. Person? Anyone?
mhb - MIke
I think it is hard for us on this side of the pond to understand the class and to some extent the wealth distinctions of English society.
Gentlemen, sounds like you may need a set of duelers..!!!Sorry if I came off wrong in my response. It was a comment after Rudyard's post about no second grade dueling pistols. I did not mean to disparage anyone. I'm not arguing with anyone. I still think it is hard for Americans to understand the titled/royal aspects in English society. It is not a critique, just an observation. I'm not questioning dueling historically or by different means. toot, my comments weren't directed at you or anyone else.
not to worry. I did not take offence to anything that you said. I merely had questions, that I rely wanted to know about and thought that the questions were in line with the use of and pertaining to dueling pistols? and apparently they were perceived as not.Sorry if I came off wrong in my response. It was a comment after Rudyard's post about no second grade dueling pistols. I did not mean to disparage anyone. I'm not arguing with anyone. I still think it is hard for Americans to understand the titled/royal aspects in English society. It is not a critique, just an observation. I'm not questioning dueling historically or by different means. toot, my comments weren't directed at you or anyone else.
thanks so much for the reply.Hi Toot,
No there was no standard caliber. Dueling pistols were made by many British and European makers each with their own style. All pistols were bought in pairs and the party challenged to the duel had the right to select the weapons. Both pistols were supposed to be identical and almost always were a pair owned or borrowed by the challenged party. Unlikely any duel would use different pistols. In the Hamilton-Burr duel I mentioned, Hamilton died in agony from his wound the day after the duel.
dave
Hi Mike,I guess the answer to the question I raised lies in the original Wogdon pistols. I have inspected, handled and shot a fair number of original duellers, both flint and percussion, and currently own and shoot a J.Probin "Maker to His R. H. the Prince of Wales" 20 bore flint dueller. In no other case have I ever found any unnecessary holes into the bore, and do not believe any contemporary gunmaker would have fitted such an attachment to the Wogdon pistols in the observed manner. The original Wogdon stock was, as is customary, keyed to the barrel, and the weight could have been (should have been) attached in the same way to the existing barrel lug. My objections are to poor practice, and the fact that duellers, in common with higher grade arms of the time, were made to be easily dismounted for proper 'washing-out', which would apparently be very difficult in the case of the foreend weight attached by a screw into the bore. In addition, the screw hole would almost certainly be a seat for corrosion and, with continued use, damage to the patch, if not a safety problem. Perhaps someone knows the facts of the original pistols' construction, and can solve the puzzle definitively. Mr. Person? Anyone?
mhb - MIke
The first recorded duel in North America was fought right here in Virginia with swords between Captains Eppes and Stallinge in 1619.did they ever use swords in a duel of honor? and when was all forms of dueling, knife's, if they were used, swords, and pistols out lawed, stopped?
yes I agree there is a good chance of droping the pistol and putting dings in it when you are hit! LOL!I know this is a muzzleloading site and i do have a lovely late 17 hundreds duelling pistol myself but i think duels should should be restricted to swords
Dave:Hi Mike,
Glad to have you post. IMO, the brass weights on the Church pistols destroyed the balance and feel that would have been experienced when the pistols were new from Wogdon's shop. In my opinion, those changes were an abortion. I too have handled a number of original duelers by Wogdon, Manton, Nock, and Innes. The latter 3 were 19th century pistols with heavy barrels and half stocks. I understand the desire for weight in both a target pistol and the concept with respect to "nervous" duelers tending to shoot high. However, the balance and feel of the full stocked, swamped barrel Wogdons was the epitome of handling. I had absolutely no doubt that I would hit whatever I aimed at with those pistols. The pair I built inspired by Wogdon are the same way.
dave
dave
Well if you were walking into the duel knowing that one of you might not walk away, fighting with such a fine weapon as that would be a fine last action.Hi,
Those copy some sort of 19th century continental European design for dueling and target pistols. I assume the components are probably pretty good but the lock doesn't impress me at all. The case is completely wrong and what I call the jewelry pillow design, perfect for storing your wife's diamond tiara but not so good for pistols. Continental pistols were usually cased as in the photo below.
Precise cut outs in a wooden block were made and then covered fabric and the edges lined in leather.
dave
Enter your email address to join: