- Joined
- Aug 25, 2007
- Messages
- 3,756
- Reaction score
- 5,698
Does anyone know if the Euroarms 1858 is compatible with parts for Uberti or Pietta, particularly conversion cylinders? Thanks!
Euroarms 1858
- Thread starter BigSkyRambler
- Start date
Help Support Muzzleloading Forum:
I tried a Uberti conversion in my Euroarms and while it worked it was far too short.
Yes the Pietta cylinders are longer than the Uberti and if it indexes and locks up that's the one to use.
CaptainKirk
54 Cal.
- Joined
- Feb 25, 2010
- Messages
- 2,253
- Reaction score
- 892
Directly, No. Euroarms (previously Armi San Paolo, ASP) was it's own entity, much like Armi San Marco (ASM). While some parts can be altered to fit (I've done it) nothing is a drop-in fit and some parts are too small, in which case there's nothing you can do.
As far as conversion cylinders, check with the fine folks at Taylors. They can generally tell you if something should fit but will probably ask you for dimensions. If you send them your gun, good chance they can fit it for you.
As far as conversion cylinders, check with the fine folks at Taylors. They can generally tell you if something should fit but will probably ask you for dimensions. If you send them your gun, good chance they can fit it for you.
Similar threads
