I have no clue what my lenses are made of. I found some "over-spec" types on MidwayUSA. I'll just run with thoseIf you have polycarbonate lenses, you will be fine. Safety glasses are polycarbonate
Call your optician where you bought your glassesI have no clue what my lenses are made of. I found some "over-spec" types on MidwayUSA. I'll just run with thoseView attachment 146888.
There's also clear over-the-glasses safety goggles, clear plastic, you've seen seniors with the big blocky dark 'glasses' over their regular street glasses? You could look into that. I'm usually good with my regular glasses, as all modern ones have a safety-impact rating, and my eye is close to the lens when shooting. Eyes are 1st consideration for safety!I'm looking for some eye pro reccomendations for someone who wears glasses. Or does the fact that I wear glasses count as eye protection?
That.Or does the fact that I wear glasses count as eye protection?
vintage looking? I've honestly never categorized them as modern or vintage, so I'm having trouble with the mental image.Are you looking for something modern looking or something classic or vintage looking, or something pc/hc?
Foremost most of my daily wear outside, and for time training, teaching, and competing, on a modern pistol range, I swear by my Rudy Project glasses with interchangeable lenses. Mostly I wear then with polarized brown lenses inserted. I have some clear lenses that are a newer material that somewhat flexes when hit for wear on the indoor range or motorcycle riding after dark.
They have taken hits from broken clay targets, countless hits from autoloader brass, a few ricochets coming off steel targets, they have touched it out and my eyes have remained unscathed.
But, they are very modern looking.
Most everyday wear glasses can be made with polycarbonate lenses, but may sacrifice coverage and leave gaps for stuff to get under or around them, over glasses look goofy but are a much safer added level of protection.
I wasn't going to bother with poly lenses in my period frames. They are so small it seemed pointless. But, if by chance something were to hit the lense before my eye,,, real glass might make the problem worse.
Excellent. As long as your eyes are protected, any eye protection is good in my book. Seeing people on the range with no eye pro' gets me pretty riled up (I've seen the damage that can be done 1st hand) and seeing people on the range with kids without eye pro' gets me enraged.vintage looking? I've honestly never categorized them as modern or vintage, so I'm having trouble with the mental image.
I managed to find these on MidwayUSA and think they'll suit me just fine.
https://www.midwayusa.com/product/1018458347?pid=472949View attachment 147075
Next time I go to the eye doc, I plan to bring that up. I haven't been shooting in years and I'm just starting to restock on the stuff I need to get back into it.Opticians can option your lenses up. Shatterproof material. My favorite: Anti glare coating which helps a great deal with night driving, especially in rain.
The over-spec ones I listed should suffice until I can look into prescription ones.Regular glasses are not safety glasses. Safety glasses are not paintball glasses, torch, plasma, or welding glasses, etc.
Prescription safety glasses are very common and reasonably priced, and getting your eyes hurt or blinded is worth a good pair or three of them.
We had to wear eye protection at work. Your best bet (IMO) is to see your eye doctor and get prescription glasses that are Z87.1-ANSI approved.I'm looking for some eye pro reccomendations for someone who wears glasses. Or does the fact that I wear glasses count as eye protection?
I find the same thing re: life time of eye protection. I tried contacts several years ago, but couldn't deal with all the junk (and wind) that got into my eyes, so I gave them up. The Workplace Safety folks would be overjoyed if everyone needed to wear glasses all the time. Still lots of injuries from people removong the safety glasses 'to get a better look'.That.
I've been wearing glasses for over 50yrs.
The current rules or regs for eye and ear protection at most shooting venues is a good thing.
Having prescription glasses on your face does count as the required eye protection.
The only time I use further protection is when I want to protect my lenses. Like when I'm grinding metals, whether it's from a Dremil stone, a die grinder or bench grinder,, I don't want "sparks" or fine metal shavings/dust hitting my lenses.
Side note;
Those of us that are long time wearers of prescription glasses,, We've become conditioned to the added protection.
I walk through the woods differently then non-glasses folks,, a leaf or small branch doesn't cause me to flinch or duck,
Wind driven dust, doesn't hit my eyes the same causing a squint,
Sun glare can be deflected with a tilt of my head,, and theres more
My body/brain has become accustomed to the protection.
My vision impairment could be mostly corrected with modern "Lasic" procedures, but if after all these years I changed to no-glasses, the flip side would be I'd probably gouge out an eye in the first week!
Besides, Mine are tri-focals,, I like the built in magnifiers,
Enter your email address to join: