Found an old TC Hawken kit in a pawn shop, pics....

[Doug Lykins]

Last fall I was visiting family in Utah. Walked into a hock-shop in Provo and spotted one of the TC kits. Nothing special here, just another TC. I'm not sure when TC stopped selling the Hawken kit but the pawn shop owner had it in his shop for a long time and he was ready to negotiate. After making a deal I brought it back home to Wyoming and after a few months put her together. These are easy to do, inletting is just shy of 100% but I had to remove a bunch of wood shape the stock. To make it interesting I put a few of my own affects to the gun.
I scrapped the brass thimbles and silver soldered a couple of iron thimbles onto the under rib. I used the brass wedge key but filed a couple of iron plates to replace the brass units. I reshaped the front sight and scraped the adjustable rear sight. I plugged the screw holes, cut & filed a dovetail slot to accommodate a fixed rear sight. All rust browned obviously. I also filed about 30% of the brass nose piece away and reshaped.



I also made a brass toe plate.


I buffed the case hardening from the lock and "antiqued" it.


I made an iron escutcheon to replace the brass unit.


What do ya think fellas?

 

[Kansas Jake]

Nice. I like the way you made it your own.

 

[FishDFly]

Cannot find the mammary glands on "her" but you have done well with your workmanship.

 

[Pete44ru]

I like the changes, and am considering doing the same to one of my T/C Seneca's.

You've done well............... :bow:

 

[longcruise]

You done good:thumbsup:

but, us cheapskates want to know the details of "the deal"!!!

 

[Doug Lykins]

You done good:thumbsup:

but, us cheapskates want to know the details of "the deal"!!!

:rotf: Lets put it this way, I've spent more taking my wife out to dinner. :wink:

 

[azmntman]

dont fergit to replace the "clean put" screw before ya shoot it! Looks SWELL :thumbsup:

 

[Cowboy]

Very nice job! I like what you did with the trigger guard and also the toeplate. Also like the rear sight. I own both a factory and a kit TC Hawken. You have inspired me to make some of the changes on my kit gun that you have made on yours. Thankyou for the pics. Respectfully, cowboys1062.

 

[don hepler]

You have a wonderful imagination, the small details, make it very unique. One of the best looking TC Hawken rifles that I have seen.

 

[Rifleman1776]

You did a fine job and personalized it. Well done. :thumbsup: Enjoy.

 

[house]

Very nice. I did the same to my TC but for the life of my can't remember how to post pics from photobucket on to here.

 

[robinsroost]

I think you have done an excellent job, I like it........Robin :wink:

 

[MSW]

nicely done!

 

[ord sgt]

I know that it is a trivial thing but replace the brass screws with steel screws. Heat blue finish looks good against the brass toe plte and patch box. Same for the butt plate.
Since you replaced some brass with iron, keep the theme going with the screws.

 

[jfaldo]

Can you tell a little more about that rear sight upgrade. Been wanting to do that to mine and haven't settled on the perfect solution yet.

 

[Doug Lykins]

Due to the comparatively high comb on the TC stock, my choices were limited. I looked through the ML parts suppliers web-sites and picked the tallest semi-buckhorn sight I could find. I'd loved to have found a rear sight with more of a buckhorn look but just couldn't find one tall enough.

 

[jfaldo]

The picture is not really clear as far as the attachment. The TC barrel has 2 screws and it almost looks like you dovetailed that sight into the barrel? Did you put filler screws in the holes and file them flush and refinish? Sorry for all the questions but would really like to know all the details and if not terribly bothersome maybe one more pic of just the sight from above. Thanks.
BTW just noticed that your from Wyoming also. What part? I'm in Carbon County in Hanna.

 

[Doug Lykins]

I'm in the Casper area now but am very familiar w/ Hanna. I was the Postmaster at Rock River for 12 years.
I used the screws for the TC sight by cutting them off, peening them into the screw holes then filing the flush to the surface of the barrel.
Cut the dovetails with a hack saw then file the nice and flat, cutting the corners with a 3 sided file. Nothing hard about it, just take your time and don't get too aggressive. I'll see if I can find a photo but I'll bet if you did a search on this site you'll find a step by step photo tutorial on cutting dovetails.

 

[jfaldo]

I know you, we have met before when you were in Rock River. I'm the local telephone guy for the area.

Anyhow, thought it looked like that's what you did. I'm not scared about cutting the dovetail just wasn't sure how much effort I wanted to put into this TC Hawken to make it only partially correct. Thanks.

 

[don hepler]

That's a great idea on the screws. I never thought of that. Track of the Wolf, sells the unfinished oval head, slotted screws.