Have Been Using A Different Approach Making Felt Wads.

the hawken shop
Shop deals on ebay
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Griff093 said:
Gee, for 37 years I've been missing out on all this "FUN"(?). All this time I've just ordered them online. Come prepackaged in 100 pc lots... I only handle them once also... when I load my revolver! ;)
Click to expand...
I doubt the bought wads cost as much as our super duper home built wads do.. Duro-felt is not cheap, bees wax always handy and just try to buy rendered bear oil ! Well thanks a lot for shooting down all my bright ideas with practical logic ! 😄
 
M. De Land said:
I doubt the bought wads cost as much as our super duper home built wads do.. Duro-felt is not cheap and just try to buy rendered bear oil ! Well thanks a lot for shooting down all my bright ideas with practical logic ! 😄
Click to expand...
No problem... glad to be of service! Although in my unmentionable BP loads I use a card wad to separate powder from bullet by punching out the correct diameter from a waxed card type milk carton. The trick there is to make sure there's no lube on the base of the bullet, otherwise the card can stick to the bullet and can upset accuracy. No one sells anything like that (I don't think poly wads do as good a job keeping the bore clean), so punching them out myself is about the only game I've found.
 
Fiber wad so as not to stick to the base and ride along for the fun, and right it will cause accuracy problems if card stock sticks to the base of the projectile…
 
M. De Land said:
I doubt the bought wads cost as much as our super duper home built wads do.. Duro-felt is not cheap, bees wax always handy and just try to buy rendered bear oil ! Well thanks a lot for shooting down all my bright ideas with practical logic ! 😄
Click to expand...
Pack of Wonder Wads, 100 pieces, in .36 caliber after taxes in Canada about $18.00 Canadian ($13.60 USD) puts them at 18 cents a wad, the last batch I made I calculated at 10 cents a wad. On the plus side I found a farm about an hour from me that sells beef tallow for $2.99 Can ($2.26 US) a pound. I was using lamb tallow but the farm I get it from raised their price to $40.00 Can ($30.20 US) a pound. I'm switching over to Beef Tallow.
 
I never tried Beef Tallow always used the mutton, Is there any difference or does it behave the same as lamb have been wanting to give a whirl.
 
Tenring said:
I never tried Beef Tallow always used the mutton, Is there any difference or does it behave the same as lamb have been wanting to give a whirl.
Click to expand...

According to Mike Beliveau Beef Tallow is almost as good as Lamb Tallow, the LT provides better lubricating properties and keeping the fouling softer, this was in a video he did about 10 years ago on making your own wonder wads.
 
Griff093 said:
No problem... glad to be of service! Although in my unmentionable BP loads I use a card wad to separate powder from bullet by punching out the correct diameter from a waxed card type milk carton. The trick there is to make sure there's no lube on the base of the bullet, otherwise the card can stick to the bullet and can upset accuracy. No one sells anything like that (I don't think poly wads do as good a job keeping the bore clean), so punching them out myself is about the only game I've found.
Click to expand...
I buy the veggie fib wads in two thicknesses, .030 or .062” for bullets. Rarely use wool wads with bullets but sometimes a rifle wants just that.
 
Tweeter and the MonkeyMan said:
According to Mike Beliveau Beef Tallow is almost as good as Lamb Tallow, the LT provides better lubricating properties and keeping the fouling softer, this was in a video he did about 10 years ago on making your own wonder wads.
Click to expand...
I am going to get some I always like having a back up of some kind, right on.
 
Tweeter and the MonkeyMan said:
Pack of Wonder Wads, 100 pieces, in .36 caliber after taxes in Canada about $18.00 Canadian ($13.60 USD) puts them at 18 cents a wad, the last batch I made I calculated at 10 cents a wad. On the plus side I found a farm about an hour from me that sells beef tallow for $2.99 Can ($2.26 US) a pound. I was using lamb tallow but the farm I get it from raised their price to $40.00 Can ($30.20 US) a pound. I'm switching over to Beef Tallow.
Click to expand...
Dang, had no idea they were that expensive per hundred, never bought any! Your making me feel better all the time about how expensive my home built wads are. I shot the bear while hunting caribou, had the bees wax given to me but did have to fork over for Duro-felt and shipping.
 
Bad Karma said:
I buy the veggie fib wads in two thicknesses, .030 or .062” for bullets. Rarely use wool wads with bullets but sometimes a rifle wants just that.
Click to expand...
Yeah, I use the veggie wads dry, for all my cast bullet rifle loads in .062. Good stuff for cast bullet wads. Course in these the bullet grooves carry the lube.
The only time I use jacket bullets any more is for hunting moose and caribou.
 
M. De Land said:
What a great idea, seating the wax paper against the powder charge,if it stays on in the cutting and handling!
Click to expand...
Press them together good and make sure your punch is sharp, also I use a plastic kitchen type cutting board for a cutting surface, one solid wack will drive the punch through the layers leaving a crisp edge on the cut wad. I have never had a problem with cutting them.
 
M. De Land said:
Yeah, I use the veggie wads dry, for all my cast bullet rifle loads in .062. Good stuff for cast bullet wads. Course in these the bullet grooves carry the lube.
The only time I use jacket bullets any more is for hunting moose and caribou.
Click to expand...
Zackly… it’s been a while since I’ve used jacketed bullets for anything, cow elk aren’t really big or tough skinned compared to moose. A big bullet from a .50 works very well. I honestly prefer the big .45’s but they’re illegal here so naturally I wouldn’t think of using them…
 
M. De Land said:
Being tighter than" Dicks Hat band" as in miserly, I'm going to start looking for and picking up old felt hats from gun and craft shows and make my wads from them I think. Got to do something to offset the new prices of caps and powder ! 😄
Click to expand...
We had a photographer hang around here for a few years taking photos of western ranchers and ranch life. Beautiful stuff. One year a lady tagged along and she bought up a bunch of old hats and some jeans
IMG_3255.jpeg
from people, somebody said she sold them in a vintage shop in New York City.
 

Similar threads

M
Making some 1/8 inch Duro-felt grease wads
Replies
8
Views
849
M. De Land
M
Hammond79
Dirty Betty Makes Meat
2
Replies
34
Views
3K
Hammond79
Hammond79
Flint62Smoothie
Loading up for my 1863 Sharps ‘paper cutter’ percussion
Replies
13
Views
1K
Badgerfarm
Badgerfarm
M
Do paper patching and OP wads make rifling depth irrelevant for connicals?
Replies
6
Views
732
Bad Karma
Bad Karma
Sparkitoff
More Cap Making Observations
2 3
Replies
59
Views
6K
oldsmokey
O

Latest posts

Back
Top