• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Heading to the woods with my dad's big bore Mountain Rifle tomorrow.

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jun 22, 2022
Messages
248
Reaction score
336
Location
Rocky Mountain House
My father passed this spring quite suddenly. All his guns came to me in the estate. He had a CVA Big Bore mountain rifle that he built from a kit in the late 1970's or maybe early 1980's.. I explained a bit more in another thread in the percussion section, but to make a long story short he only shot it a few times with little success. When it came to me I got it out this summer and was also having issues. The kit was listed as a 54 caliber, and that's what the barrel is stamped as, turns out its actually a 58 caliber big bore that was incorrectly stamped at the factory and I now have it shooting very well. My dad also had an old model 1892 44-40 that came to him from my uncle about 7 years ago. it had hung on my uncles wall with some other inherited firearms for over 50 years. When my dad passed so suddenly he had all kinds of projects on the go for me, leather knife sheaths etc, and walking into his shop after he passed was very difficult for me as it seemed he should be coming out from the house at any moment to continue work on the projects. I got brass, dies and bullets for the 44-40, and I got a deer with it a few weeks ago, I got the big bore figured out and it's going to the woods with me tomorrow. For my dad the passion was building the rifle from the kit and not so much hunting with it. For me it just seems like another unfinished project. I can't finish all the carpentry and other projects he started but for me getting these rifles shooting and being able to harvest a deer with them is helping me with closure. So tomorrow morning the weather looks like it will be a nice cool November blue bird Alberta day and I hope I can be successful with this rifle too and close another unfinished chapter!
 
so sorry for your loss
we think that our parents are invincible until suddenly they are gone. losing my parents was only surpassed by losing a child. ain't supposed to happen.
i will be sending all my good thoughts for your hunt.
a 92 in 44-40 turns my crank almost as much as a CVA mountain big bore!
 
Best wishes on your hunt.

Whether you get a shot or not, the important thing is hunting with the rifle he built in his memory.
Very good point! Had a great day walking in the woods with the rifle at the ready. No deer seen, tomorrow is another day to give it a go.
 
Well I gave her a good go these last 10 days. Our season ended today. I only had opportunities on bucks but I already filled my buck tag with my flintlock and only had a doe tag left. It was great to pack dads rifle around in the woods and that alone made it a success. It was -20C and snowing pretty hard all day today, the last day of our season. I have had the rifle loaded for the last 10 days and just before last light tonight I took aim on a big cottonwood to fire off the rifle so i could clean it and put it away when I got home. It fired without hesitation and hit the knot I was aiming at. Next season this will be the first rifle into the woods.
 
My father passed this spring quite suddenly. All his guns came to me in the estate. He had a CVA Big Bore mountain rifle that he built from a kit in the late 1970's or maybe early 1980's.. I explained a bit more in another thread in the percussion section, but to make a long story short he only shot it a few times with little success. When it came to me I got it out this summer and was also having issues. The kit was listed as a 54 caliber, and that's what the barrel is stamped as, turns out its actually a 58 caliber big bore that was incorrectly stamped at the factory and I now have it shooting very well. My dad also had an old model 1892 44-40 that came to him from my uncle about 7 years ago. it had hung on my uncles wall with some other inherited firearms for over 50 years. When my dad passed so suddenly he had all kinds of projects on the go for me, leather knife sheaths etc, and walking into his shop after he passed was very difficult for me as it seemed he should be coming out from the house at any moment to continue work on the projects. I got brass, dies and bullets for the 44-40, and I got a deer with it a few weeks ago, I got the big bore figured out and it's going to the woods with me tomorrow. For my dad the passion was building the rifle from the kit and not so much hunting with it. For me it just seems like another unfinished project. I can't finish all the carpentry and other projects he started but for me getting these rifles shooting and being able to harvest a deer with them is helping me with closure. So tomorrow morning the weather looks like it will be a nice cool November blue bird Alberta day and I hope I can be successful with this rifle too and close another unfinished chapter!
Good luck when you go hunting! Your dad will be there with you!
 
Had a great walk today, jumped one buck but couldn't get a shot.
 

Attachments

  • IMG_4599.jpg
    IMG_4599.jpg
    1.4 MB
  • IMG_4624.JPG
    IMG_4624.JPG
    1.2 MB
Fat,
I know what your going through. But sounds like your dad will be with you on this hunt as you use the rifle he built. Remember he is walking with you as if he was right beside you. If you listen closely you can probably hear him call the shot when the buck you didn't know was there steps out. Good for you in keeping his memory alive!
 

Latest posts

Back
Top