• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Help identifying a mould

the hawken shop
Shop deals on ebay
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
L

lawnwood1229

32 Cal
Joined
Jun 27, 2024
Messages
4
Reaction score
2
Location
Georgia
Hello All;
Would anyone be able to help me identify this mould. The only ones similar I have seen are .44 Walker moulds but I can find no markings identifying this one as such, and my knowledge is minimal. There is a small c stamped next to a cavity (in the second photo it is just above the cone). There is some information stamped on the bottom but it is covered by pitting. You can just make out a mark that starts with E. You can see the E in the last photo.
Thank you for any info you can provide!
Cheers!
 

Attachments

  • tempImagew2WAkA.png
    tempImagew2WAkA.png
    15.5 MB · Views: 5
  • tempImageLhCqZX.png
    tempImageLhCqZX.png
    1.2 MB · Views: 0
  • tempImagePGKBeZ.png
    tempImagePGKBeZ.png
    15.3 MB · Views: 0
  • tempImageXJa2n0.png
    tempImageXJa2n0.png
    5.9 MB · Views: 0
  • IMG_9273.jpg
    IMG_9273.jpg
    1.2 MB · Views: 0

Similar threads

L
Help identifying an old mold
Replies
1
Views
170
ZUG
ZUG
G
Please help identifying these two
Replies
9
Views
811
Rob M.
Rob M.
A
Help with identifying a lock
Replies
7
Views
763
David Austin
David Austin
A
Help Identifying a Pair of Mid 1700s Flintlock Pistols
Replies
5
Views
378
alfordjp88
A
M
Identification Help
Replies
3
Views
492
mt_789
M

Latest posts

Back
Top