• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Hole punch

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Mar 6, 2022
Messages
166
Reaction score
181
I use this craft punch 3/4 for my 12 gauge shotgun. I have one of those steel smack with a hammer for felt, but found this cuts faster and cereal boxs beer boxes....... cuts fine with this craft punch.
 

Attachments

  • 20241031_142647.jpg
    20241031_142647.jpg
    1.4 MB
  • 20241031_141422.jpg
    20241031_141422.jpg
    1.2 MB
Where’d you acquire said punch? Never knew such creatures existed.
You're going to laugh. Amazon. Normally used for the scrap book crowd. I have a couple orginally i used for paper cartridge for my revolvers. I have different sizes for that. Even a 1 inch for making paper cartride for a modern muzzloading shotgun pistol from American gun craft. Ive got on a smoothbore kick.
 

Attachments

  • 20241031_144724.jpg
    20241031_144724.jpg
    1.1 MB
Last edited:
You're going to laugh. Amazon. Normally used for the scrap book crowd. I have a couple orginally i used for paper cartridge for my revolvers. I have different sizes for that. Even a 1 inch for making paper cartride for a modern muzzloading shotgun pistol from American gun craft. Ive got on a smoothbore kick.
I’ll have a looksie on the old Amazon. Just starting the smoothie process myself. This smoothie greenhorn thanks you.
 
I’ll have a looksie on the old Amazon. Just starting the smoothie process myself. This smoothie greenhorn thanks you.
I scoured and read brittsmoothy replies and helped a ton in the smoothbore threads. I've had best results so far 70 grains powder 3-4 of my over shot cards in top of powder 1 1/8 oz shot then 2 cards on top. Hasn't mattered much if using #8 shot or #5 shot. That only size i have. I need to do more work though with my round ball loads.

Now i want a flinter smoothbore


Lets us know how your journey goes.
 
Back
Top