I don't know what's up with LMF and at this point I don't care anymore, I just need some Permalyn Sealer. Since the national stock is depleted with no re-stocking on the horizon, is there a mixture of readily available stuff that can replicate it?
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Home-brew Permalyn
- Thread starter yellowhammer
- Start date
Help Support Muzzleloading Forum:
Poyurethane spar varnish.
Just skip the poly junk (including Permalyn) and stick with T&T varnish oil. Don't thin it, not even for the first coat. Put a thin smear of it on a piece of glass or clear plastic packaging material and Don't even think about putting another coat on the stock until that smear is dry. This might take a month, but will take at least a week. Four, very thin, hand-rubbed coats will do nicely.
nchawkeye
58 Cal.
I used the Jim Chambers oil finish on my Kibler Fowler, was happy with how it turned out..
