longcruise
70 Cal.
Did you go hollow or solid brass?
How I Make A Ramrod and Range Rod
- Thread starter N.Y. Yankee
- Start date
Help Support Muzzleloading Forum:
- Joined
- Jul 8, 2019
- Messages
- 3,173
- Reaction score
- 5,710
I don't know if you directed your question to me or not but I chose a solid brass rod as close to the diameter of the jag as possible, don't remember exactly and I am to lazy to take them down to measure? LOL!
You need a solid rod to drill and tap for your jag to screw into it. It is hard to tap a hollow rod in the center?
One plus is it will age well and to me looks like it belongs on the rifles?The thought of an oak ramrod gives me the willys. Some Oak species are know to easily break and splinter. As appointed "range medic" (Cause i had the big first aid kit in my truck) i have seen results of not being careful when loading. It was usually newbies with hardware store doweling or non hickory woods. Being out of ML now this last decade I now wonder how the Ramin wood rods are holding up with age and use. I found this thread amusing.
https://www.muzzleloadingforum.com/threads/ramin-for-ramrods.121477/
https://www.muzzleloadingforum.com/threads/ramin-for-ramrods.121477/
I wonder about black locust. I use it for raised beds, fence posts and such. Probably be an sob to turn a dowel out of.
I don't reccommend FG rods; as they wear, the glass fibre is exposed, and the exposed fibres will abrade the rifling in your muzzle very quickly. Only use them with a muzzle guide for this reason. A friend wore the last inch out of his rifeling in a couple of years; had to shorten the barrel a bit to restore accuracy. Get a plastic one (PVC welding rod) instead if you want a floppy rod. I have personally never used anything but wooden rods, and have never broken one in use. I have a sectional steel rod which I can drag out for exceptional uses, and use steel cleaning rods at home.
longcruise
70 Cal.
I don't know if you directed your question to me or not but I chose a solid brass rod as close to the diameter of the jag as possible, don't remember exactly and I am to lazy to take them down to measure? LOL!
You need a solid rod to drill and tap for your jag to screw into it. It is hard to tap a hollow rod in the center?
I did. I forgot to insert the quote.
- Joined
- Mar 23, 2021
- Messages
- 2,835
- Reaction score
- 6,066
IF! I were to make an "other than hickory" rod I would make it out of Delrin from here (click this link) McMaster-Carr it machines and holds threads well and will not wear the riflings. I have one that I use on my BPCR rifles as it is flexible and gets around the soule sights. Hickory however has never let me down and I don't see the need for anything else in a flintlock.
Fiberglass can be very abrasive and can damage the crown so if you use it please buy a plastic or brass muzzle protector. I've had to recrown a number of barrels for customers because of them.
- Joined
- Mar 23, 2021
- Messages
- 2,835
- Reaction score
- 6,066
I would pick the biggest diameter that would fit in your thimbles if you are going to use it in them, if your going to use it as a range rod I would get the biggest that will fit the bore, maybe 7/16 or so.
Sorry i meant 5/16" but correct on the 7/16 size for range rod. Was gifted a complete 7/16", 48" delrin. It works ok but man that thing is "whippy". It is brass ended, glued, pinned and threaded for attachments. It is so flexible its sometimes hard to use. Reminds me of some CW movie scene where troops capture a ***** soldier and beat him to death with their whippy steel ramrods!!!!
I used a fiberglass ramrod about 30 years ago. I was thrilled that I used a bore protector.
longcruise
70 Cal.
This has been stated and repeated over and over here and throughout the Muzzleloading community. I first heard it over 40 years ago. It seemed logical to me and I accepted this bit of "wisdom". I never gave it much thought because I had no interest in fiberglass rods.
It has been proven otherwise and the testing has been discussed right here on the forum.
https://www.muzzleloadingforum.com/threads/fiberglass-ramrod-ruining-a-barrel.55168/
longcruise
70 Cal.
- Joined
- Jul 8, 2019
- Messages
- 3,173
- Reaction score
- 5,710
"It has been proven otherwise" ? Did I miss something?
Once had a guy at range using one of those 36" (?) red sectional fiberglass brush rods from a chimney cleaning set. He was using it on a 12 G ML Shotgun. During the Match he injured himself with it. A piece of glass fiber peeled loose and stuck deeply in his hand while loading. As range "doc" (i had first aid kit) i pulled most of it out with tweezers but had to go to ER to get rest out.
longcruise
70 Cal.
- Joined
- Jul 8, 2019
- Messages
- 3,173
- Reaction score
- 5,710
I read #53 and #54 and I am confused? How do they prove anything? All I got was a opinion? Everyone has an opinion but opinions are not worth a thing without proof.
longcruise
70 Cal.
Read the first post here by Zonie.
Am I missing some factual evidence that would refute the bevel brothers test.
https://www.muzzleloadingforum.com/threads/ramrod-material.42002/
- Joined
- Jul 8, 2019
- Messages
- 3,173
- Reaction score
- 5,710
With all due respect running a rod only seven inches isn't the same as running a rod down the full length of a barrel where the rod can bend and rub against the inside of the barrel. If you recall in our history books people use to think the world was flat?
Similar threads
