How many....

[longcruise]

Not me. Why would one do that?
Larry

Because he is doing everything else wrong!

That destroyed patch is caused by one or more Failures of his system or components. Eg., patch too thin, patch too weak, bore rough, and more. When the load is tight enough with a clean crown and a clean smooth bore and a strong material, the patch isn't going to burn up or be wrecked. FWIW, that last patch he shows off doesn't look good at all. It shows shredding right up to where the ball contacts the bore. That can indicate the patch is too small.

Here's what a tough proper fitting patch fired from a rifle with a clean crown and smooth bore looks like. Oh, and lube? I get the same results regardless of lube. Probably the same with a dry un lubed patch.

 

[TarponStalker]

I use a pinch of corn meal on top of the powder. Before I started doing that my #40 pocket drill or any other patch was shredded beyond recognition. No matter what lube or charge I use.
I tried cleaning up the lands at the muzzle and working the bore a lot with 4/0 steel wool and Scothbrite but nothing worked until I started putting a buffer under the ball.
My patches are now almost reusable.
I haven't shot without a buffer with my newest rifle so it may shoot fine without it.
But to answer your question I've never tried a patch