• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Hunting with 10 gauge

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Onojutta

45 Cal.
Joined
Dec 19, 2007
Messages
876
Reaction score
112
Location
Martic Township, Lancaster County
I have the opportunity to buy a 10 bore (gauge) original nineteenth century BP muzzleloading shotgun for a very fair price. I don't buy guns I don't intend to use, so my question is, how does 10 bore do with small game and upland birds? I have always thought of 10 gauge as meant for "coach guns" or defense, or for larger quarry such as geese and big game. Is 10 gauge black powder too much gun for squirrels, grouse, pheasant? How is the recoil?
 
IDK but one advantage of muzzleloaders is that you can Taylor the load to what you are doing.

A 10 Gage unmentionable would be a lot of squirrel or rabbit, especially with a choke.

A 10 cylinder bore, with a light powder load, may be great for rabbits, and other fast moving game.
 
I would think a 10 gauge would be fine for upland game. It might be overkill, pun intended, for squirrel but fine for pheasant, grouse, etc. I have no experience but suspect one could load it lighter for such game.

I do have a J P Claborough double 10 gauge in pieces with a badly broken stock I keep thinking I need to restore. The barrel has a bad dent that would need to be taken care of too.
 
Some folks might disagree, but a lot of experience hunting w/shotguns both unmentionables and m/l shotguns make me say , "bigger is better" . A 10 ga. m/l shotgun can use tailored loads for the game being hunted. I/E.....Squirrels , medium loading , 1 and 5/8 oz. # 4 , 5 , 6 shot. Same for pheasant , geese full load w/ heavier shot , etc.. It is easy to turn a big bore into a smaller bore as the situation demands. It is more difficult to make a small ga. into a larger ga. w/o sacrificing kill distance , etc.. ..................oldwood
 
You say the gun is a original most likely it is true cylinder if a D/B most likely it will have 32 inch barrel and if a S/B 32 -36 inch or longer. You will find that the weight of a 10 bore is heavier than a 12 so a light load for a 10 would be 3 drms FFG to 1. 1/2 oz of 5 or 6 shot. . you do not need a heavy load of powder and shot to shoot a pheasant or partridge and grouse If I was shooting winged game with a 10 bore I would load a 12 bore load of 2.3/4 drms of FFg to 1.1/4 oz of 5 or 6 shot
Feltwad
P1010018.JPG
 
Last edited:
I don't have a 10 gauge, but I have a J Hollis 11 that is really close. What I find is that I don't have to use heavy loads for it to be useful. One benefit to a muzzle loading shotgun is that you can tailor your loads to your needs at the moment. I regularly shoot 1 to 1 1/4 oz shot loads with 60-70 grains FFG and it works very nicely without much kick. I have shot 1 1/2 oz loads with 90-100 grains FFG and you do sit up and notice.
 
Back
Top