Invest Arms Hawken sight question/recommendation.

[Flintlock Whiskey]

I got a really sweet deal on the rifle mentioned above and because of my questionable eyesight, I would like to mount a peep sight on it. As shown, it has a substantial tang. So, I need your help and suggestions.

 

[TechMoron]

Get the Lyman 57 SML that's made for these guns or if your tang drops too much get the 57 GPR which is the exact same sight but comes with a wedge to level it up. You'll need to drill & tap one hole in the tang to mount it.

 

[leadhoarder]

I just received a peep sight from Tom A Hawk and his sight fits the investarm hawken just fine.

The Lyman sight was going to require modification to fit. At least on mine.

 

[TechMoron]

Drilling and tapping one hole in the tang is not really that much of a 'modification'.

 

[leadhoarder]

In my case I was going to need to remove wood from the stock or maybe a substantial amount of material from the sight base.

 

[TechMoron]

In my case I was going to need to remove wood from the stock or maybe a substantial amount of material from the sight base.

Or put a spacer under the sight?