Have a TC Hawken .50. 1-48 twist. I have some Buffalo Bullet conicals that came with it. Pretty old. What do you lube these bullets with? Or any lead bullets? Or do you load them dry? I see bullets on the Track of the Wolf site with "lube grooves".
Is there a lube for shooting conicals?
- Thread starter Bill M.
- Start date
Help Support Muzzleloading Forum:
longcruise
70 Cal.
Definitely need to be lubed. Are the bullets you have lubed and dried out? If they have old dried lube they should be cleaned and relubed. Soak them for a day or so in mineral spirits to clean them.
There are many lubes available and many formulas to make them. The very simplest would be crisco or lard. But they are not a good choice in how weather where they go liquid. You can mix some beeswax in to stiffen either of those.
You clearly could benefit from some mentoring. Check for ml clubs or activities nearby and show up. You will find yourself welcomed.
There are many lubes available and many formulas to make them. The very simplest would be crisco or lard. But they are not a good choice in how weather where they go liquid. You can mix some beeswax in to stiffen either of those.
You clearly could benefit from some mentoring. Check for ml clubs or activities nearby and show up. You will find yourself welcomed.
- Joined
- Jan 31, 2009
- Messages
- 13,221
- Reaction score
- 7,560
I use a mixture of lanolin, olive oil and beeswax for everything that I can get it to work for.
50:50 beeswax & olive oil for me!
- Joined
- Nov 16, 2009
- Messages
- 4,620
- Reaction score
- 8,343
I’ve been using the Idaho Lewis blend. SPG or NASA (Bullshop) lube one pound block, 2oz. Stihl HP Synthetic oil, and then your choice of vegetable oil to make it the consistency you want. Lewis used peanut oil, I’ve used olive oil and jojoba oil, couldn’t tell any difference between them. I make mine fairly soft, if you’re in a warmer climate you might prefer a stiffer consistency. This stuff keeps the fouling soft, even with.Swiss powder which can be kind of crunchy, and prevents leading.
If you use beeswax and lamb tallow it won't get rancid.
- Joined
- Jun 17, 2019
- Messages
- 8,506
- Reaction score
- 9,993
I once asked a guy what his lube formula was, and he said, None Of Your Beeswax! 
rodwha
58 Cal.
I’ve used Gatofeo’s lube on my pistol bullets and REALs, though I can’t get the rifle to behave yet. Maybe the lube isn’t all that great for that application. It’s an old formula for outside lubed pistol bullets, but I recall Gatofeo claiming it good for patches too, not sure about rifle bullets.
- Joined
- Jan 27, 2004
- Messages
- 1,715
- Reaction score
- 526
I shoot "Sheepherders Lube", similar to the NASA Lube.
Yes, you will need to lube them. Ask 10 different folks, get 23 different answers. There are a few constants though. First use ONLY natural, animal based products as ingredients. The ONLY exception I've found to this is pure Mobil1 synthetic oil. Second, don't be afraid to test and experiment. Third, fouling will change as conditions change and you may find you need to adjust the mix based on season/environment.
wonder lube makes a bullet lube
You can order SPG online and just use that. It will certainly work all by itself. I've had great luck with it.
Another vote for SPG. Works very well.
new2bp
40 Cal
- Joined
- Aug 18, 2021
- Messages
- 344
- Reaction score
- 507
Ideal lube recipe will vary dependent on local temps, etc. What works for me in mid summer in Florida won't work for someone in Minnesota in December or January.
Crisco or some other natural oil as a base, beeswax to harden, and lanolin to make sticky. Use a double boiler to melt (get cheap disposable aluminum meatloaf tins at the dollar store so you don't make the wife mad), mix and mix while cooling otherwise the beeswax and oil will separate.
Crisco or some other natural oil as a base, beeswax to harden, and lanolin to make sticky. Use a double boiler to melt (get cheap disposable aluminum meatloaf tins at the dollar store so you don't make the wife mad), mix and mix while cooling otherwise the beeswax and oil will separate.
Well, I was going with what was used during the Civil War- does that count? Don't think YouTube was around.
A popular lube for me has been 1 part tallow, 4 parts beeswax, by weight. I often use beef tallow, but my next batch will be bear tallow.
- Joined
- Jan 15, 2009
- Messages
- 3,115
- Reaction score
- 3,069
Several years ago i bought a big bunch of Bore Butter at a yard sale. Best conical lube i've found is 1/2 Bore Butter and 1/2 bees wax.
Stand the conicals on their bases in a pan and pour the melted mixture over same.
Stand the conicals on their bases in a pan and pour the melted mixture over same.
Civil war era Lard
