Japanese tower pistol replica stock?

[Rudyard]

I rather doubt the makers thought it was to be used , they where cheap & cheerfull priced accordingly . But they will work up to be well enough considering .
Rudyard

 

[TNGhost]

View attachment 29555
I think I have the same gun

I have one around here somewhere myself that after frigging around with it, hardening the frizzen and tinkering with the lock, got it to work somewhat regularly. Good fun with a load of shot for combating rabbits in the garden among other things.

 

[Many Klatch]

I bought two of these pistols. I paid $25 for one and $10 for another. Both had been wallhangers and never fired. One had been on full **** for over 25 years. The metal parts inside the locks had never been hardened and the springs were toast. I had a bunch of spare Siler parts from other locks. So to fix the locks I removed all the original stuff and scrapped it. Fortunately, the Siler **** fit into the hole in the lock plate well enough. I drilled and tapped new holes in the plate so the Siler parts would work. They both eventually became something that would shoot. Accuracy was not part of the deal though. The best load that I found that worked was buckshot. At 12 feet I could mark up a target board sometimes.

I sold one to a "Pyrate" reenactor (Ahrrrr). Can't remember what happened to the other.

They were something interesting to play with. I get the connection with the Uncle and the desire to fix them up to honor his memory. Just know that these pistols are barely worth the effort to repair outside of the sentiments.

 

[toot]

keep all screws & pins tight when you are done and start shooting it. check often and at reassembly after cleaning.