• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

WITHDRAWN Kibler/ Edwards .40 SMR

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

JCB

32 Cal.
MLF Supporter
Joined
Dec 21, 2014
Messages
113
Reaction score
146
Location
The Kanawha Valley
Kibler .40 caliber assembled by Chuck Edwards. Chuck didn’t sign it,but I’m sure if you contacted him he would confirm it’s his work. Anyone who knows his work can tell by just looking at it. It has the 46” rice barrel and Chambers late ketland lock. The lock is very reliable and the gun shoots very well. I’ve found it to shoot good with both 30 and 60 grains of FFF and a .395 ball. $2,275.00 shipped CONUS. Certified check or money order. Could take less if your close enough to do a face to face.
E9454435-7C84-450D-A865-54DEA5E8A727.png
DFEA273F-EC6D-4E80-8130-A2EA94D6C5D6.png
1E16B3E4-44CD-4F39-8CFA-A8FB365177E8.png
ACC128A9-DD4D-4A13-8708-DA653D9375A8.png
1EB3A2EC-7C33-4189-B5C8-E03A8D28299B.png
DB6FFFB0-E2A8-45C5-9B93-FDDA8271B86A.png
 
Status
Not open for further replies.
Back
Top