Ever wonder how to get lead out of a barrel?
It's easy.
Just use water.
The hotter the better.
It's easy.
Just use water.
The hotter the better.
Lead fouling.
- Thread starter Britsmoothy
- Start date
Help Support Muzzleloading Forum:
Comfortably_Numb
The Evil Mike Brooks
That's going to leave flash rust in your barrels.
Nope.
Dry it out and the warmth helps there too and after a few minutes a patch of lube goes down and out.
30years and counting.....no rust.
No flash rust for me either. This is definitely my preferred way of cleaning a barrel that is not coming out of the stock. Quick, easy, scalds whatever is on the bore walls right off.
Funny that comes up so often
I’ve used hot water for years vs you get flash rust for any thing warmer than body temp.
I wonder if it’s a mineral thing in the water, level of chlorine or such.
Temp makes chemistry happen, so flash rust makes sense, but I’ve used pretty hot water, not boiling but too hot to touch for years. So hot I generally have to use a rag to hold the barrel
I wonder why people have such different reactions
I’ve used hot water for years vs you get flash rust for any thing warmer than body temp.
I wonder if it’s a mineral thing in the water, level of chlorine or such.
Temp makes chemistry happen, so flash rust makes sense, but I’ve used pretty hot water, not boiling but too hot to touch for years. So hot I generally have to use a rag to hold the barrel
I wonder why people have such different reactions
^^^ this. coupled with whatever your mineral/chemical content is with the water. So many differences. Just like a persons physiology + their environment.
I would love to hear results of someone that has a flash rust issue using boiled distilled water. If there was a change or if it still flashed.
- Joined
- Dec 9, 2005
- Messages
- 1,100
- Reaction score
- 121
I used to get flash rust, but it stopped when I started treating the water to reduce the amount of iron (and manganese) in it. Not a quantified study with a control group, but it strongly suggests that iron in the water can be the source of flash rust.
Going to mow. Should have done Saturday. Takes about 2.5 hours on the zero turn. That mower has a 2 cylinder 27 HP Kawasaki engine and it flies!
Cushion wads came into being as a regular component of the smoothbored shot load when the unmentionable shotgun cartridges made the change from a full cartridge of black powder and ball to an equivalent performance of the smokeless variety powder there was a lot of room left in the cartridge. That was filled by a cushion wad. It did have the benefit of being lubricated
I mowed this morning.Takes me about 1 1/2 on my zero turn. Mine has a Kwak engine also...24 hp.
Off to the cardiologist in a few minutes.
Sorry about the thread drift. Kinda lost track of the thread I was in.
Last edited:
Boil.
I want the barrel/s to get very hot. To dry them out quickly.
