Lead pouring blues
- Thread starter bassncrap
- Start date
Help Support Muzzleloading Forum:
- Joined
- Mar 13, 2020
- Messages
- 7,522
- Reaction score
- 21,113
- Location
- On the Border in Idaho looking at BC
now ya went and made me curious enough to get out of my recliner and go check mine! sigh..............
went out and looked. none like the op's. all 6 doubles are good. never observed any quite like that.
went out and looked. none like the op's. all 6 doubles are good. never observed any quite like that.
Last edited:
My list from another board, see Rule #11:
Gear’s rules:
#1 You will drop 87 out of 100 live primers on the floor as soon as you open the sleeve and only find half of them.......but not spill a drop while pouring a cup of coffee over the sink while still half-asleep.
#2 Improve our national marital statistics: Stay out of your wife's kitchen with gun stuff.
#3 Just because others couldn't do it doesn’t mean you will. Think about it.
#4 The mould will finally start dropping perfect bullets five minutes before you are called to supper.
#5 Don’t argue with stupid people. Have mutually enlightening discussions with intelligent people who happen to have a different point of view.
#6 Properly stored ammo and components don't spoil, eat, or increase your rent. So stock up before the panic-buyers do.
#7 It's actually true what they say that shooting straight wheel weights will ruin your barrel. They have to be made into bullets first.
#8 Hodgdon will discontinue the only powder that ever produced good groups from your favorite firearm.
#9 Always wear appropriate PPE......because Murphy was really an optimist.
#10 Beware the loose nut holding the handle on someone else’s reloading press.
#11 Picking up and hoarding all that free range brass in chamberings you don't own will eventually cost you a lot of money.
#12 Your best groups will be made on the day you have no witnesses, no camera, and it rains on your targets.
#13 Casting bullets and handloading will in fact never save you any money. However, you will shoot more for the same dollar and will spend less money on booze....unless you happen to own a Swedish Mauser.
Last edited:
spurrpote
32 Cal
bassncrap,
Lee's reply sounds reasonable to me. Your photos are excellent. I've been using Lee molds for many years and never had a similar problem with new molds. If you can't stand to use the mold as-is I suggest purchasing another mold perhaps from Lyman.
Another thought is to cast a bunch of balls with the offending Lee mold. Find a medium size clear glass jar and dump them in and gently shake until sprue marks disappear. I read about this technique from a post on this forum but haven't had a need to try. Hope this helps.
Lee's reply sounds reasonable to me. Your photos are excellent. I've been using Lee molds for many years and never had a similar problem with new molds. If you can't stand to use the mold as-is I suggest purchasing another mold perhaps from Lyman.
Another thought is to cast a bunch of balls with the offending Lee mold. Find a medium size clear glass jar and dump them in and gently shake until sprue marks disappear. I read about this technique from a post on this forum but haven't had a need to try. Hope this helps.
bassncrap
40 Cal
Oh Im keeping the mold. Ill clean up the burrs and see how the balls come out and shoot them. I am considering the Lyman RB mold since I have a Lyman handle that needs a mold for it lol
