I clean my Frontier with a .22 cal brush in the breech. No problems with ignition.
Lock Upgrades on Pedersolis
- Thread starter Nuthatch
- Start date
Help Support Muzzleloading Forum:
Using the vent pick during the loading sequence seems like it could be a good idea.
As for 777, no. Real black -- always. I don't recall if I was using Scheutzen this time or homebrew. But I almost always prime with homebrew as it's faster due to lower density. That stuff catches a spark like nothing else can.
I got one of those fluky Kentucky rifles that has the set trigger. I've been swapping out for the percussion lock when I do my woodswalk course or hunt because I just can't quite hit anything with the flinter yet. With the percussion, I'm good to 100 yards from a seated position. With the flint, I struggle to hit a beer can from 25 yards with a rest.
- Joined
- Mar 13, 2020
- Messages
- 7,493
- Reaction score
- 21,013
- Location
- On the Border in Idaho looking at BC
keep at it with the flinter. you soon get over the flinching from the explosion next to your eyeball! i don't see it anymore but sometimes with excess powder in the pan i flinch from particles hitting my face. this doesn't effect the shot hopefully as it should be down range by the time my face gets splattered.
hanshi
Cannon
He actually posted 1/16" which I use as well.
Tasbay, I had the very same problem with a Pedersoli rifle I owned years ago. Unless I'm mistaken they use some sort of "patent breech" which is sometimes difficult to get the bore charge powder all the way to the vent liner. I did the same thing you did and installed a percussion lock which worked perfectly.
64Springer
75 Cal.
hanshi
Cannon
Mistake in my post. The original poster was Nuthatch, I just read too fast. Sorry.
hanshi
Cannon
I mistakenly used the wrong op name in my post, the original poster was Nuthatch. I stand corrected.
I just run the vent pick into the hole before I prime and no issues. Goes boom every time.
Mike in FL
50 Cal.
My Lyman/Pedersoli had slow ignition so I enlarged touch hole to 1/16 and bought a new liner coned on the inside, then I coned the outside, which can be done carefully with a drill bit. Now it is plenty fast.
A lot of problems come from too much priming powder.
My issue with the Kentucky lock is the horrible geometry. I sent mine to Brad Emig to have it tuned and adjusted. It came back better than I expected and the lock and ignition is much faster. He fiddled with the springs to get a better frizzen to mainspring ration and heated and bent to cock as much as could be to get the fling pointing to the pan. His opinion about production gun locks is that they are designed by a corporate committee and not a competent gunsmith. I am much happier with the tuned lock. Some grinding on the sear spring helps the trigger pull too.
What percussion locks were used to replace the Pedersoli flintlock . on the Kentucky rifles.
By the way the Pedersoli Kentucky. Has a flat face breach plug if anyone was interested.
By the way the Pedersoli Kentucky. Has a flat face breach plug if anyone was interested.
Just a pedersoli kentucky percussion lock. It fits a little more snug in the stock but still a great fit. Drum came from TOTW to replace the vent liner.
Thanks I'll look for the lock.
