WANTED Looking for .575 minieballs

[ArbiterThel68]

I am looking to buy some minieballs of .575 diameter, I would strongly prefer them to be sized and lubed already, I don't really care if the lube is historically accurate or not, as long as it sticks the bullet and it works, Thanks.

 

[OldSmoky1967]

Good luck. Most us cast them larger then lube and size them after. If you can find som locally that would be best. They tend to get banged up in shipping as they are rather thin skirted normally. If you could find some thick skirted minies that might work anyway.

 

[ArbiterThel68]

Good luck. Most us cast them larger then lube and size them after. If you can find som locally that would be best. They tend to get banged up in shipping as they are rather thin skirted normally. If you could find some thick skirted minies that might work anyway.

Aslong as I can thumb load them i don't mind the thick skirted.

 

[ArbiterThel68]

Good luck. Most us cast them larger then lube and size them after. If you can find som locally that would be best. They tend to get banged up in shipping as they are rather thin skirted normally. If you could find some thick skirted minies that might work anyway.

I have no idea where to look locally for something like that.

 

[OldSmoky1967]

Aslong as I can thumb load them i don't mind the thick skirted.

Yes. That’s the reason for sizing them. I have a George Gompf mold that drops a hollow based .580 wadcutter that I size down to .575 for that perfect fit. But I don’t have minies. Lee makes a 575-611 mold that should work. Can probably find on eBay.

 

[Flint62Smoothie]

Contact Tony at The Cast Bullet Shop, last I looked they were $45 per 100, not a bad price at all!

http://www.thecastbulletshop.com/

 

[bluemule66]

I may have a bunch cast up. I will measure to verify.

 

[loflyr55]

I am looking to buy some minieballs of .575 diameter, I would strongly prefer them to be sized and lubed already, I don't really care if the lube is historically accurate or not, as long as it sticks the bullet and it works, Thanks.

Contact Pat Kaboski at lodgewood.com or through NSSA. He can do it for you, maybe send an assortment of types and diameters to see what shoots best.

 

[ArbiterThel68]

Bump, still looking