Lyman 1858 Rem

[rickjf]

I have a Lyman 1858 Rem. It need a new loading lever but I don't know who made these. It will not interchange with Pieta revolver

 

[CaptainKirk]

I would suggest you contact Lyman directly, either by phone or via email.

Lyman's website: http://www.lymanproducts.com/lyman/muzzle-loaders/

Mail/contact info:
Via Mail
Lyman Products Corp
475 Smith Street
Middletown, CT 06457

Via Phone Consumer & Dealer Sales and Service
800-225-9626
800-423-9704
860-632-2020

Via Fax 860-632-1699

Hours of Operation
Monday through Friday, 9:00 am to 4:30 pm, EST

Here is a link to their email: http://www.lymanproducts.com/lyman/contact/

If that doesn't work out, many times similar parts from other manufacturers can be slightly modified to fit. (Don't ask how I know this...) :idunno:

 

[Robert an saa fan]

Early Lyman Remington's were made by Uberti and should have a Uberti logo mark (Octagon with a 'U' inside) on the barrel bottom or less likely the frame.

I think most of the Lyman revolvers were made by Armi San Paolo (ASP later became Euroarms). If made by Armi San Paolo it will have the marks GDG.

If made by Uberti you can try www.vtigunparts.com.

If Armi San Paolo you will likely have to fit another manufacturer's lever. You might try contacting:
http://www.euroarms.net/euroarms_netcompany_file/FRcompany_profile.htm

http://www.euroarms.net/euroarms_netPages/MARKING.htm

As CaptainKirk said you might call Lyman to see if they have advice.

 

[arcticap]

Winchester Sutler sells Euroarms revolver parts and does list the loading lever:
http://winchestersutler.com/Part.html

Another Euroarms distributor is SS Firearms:

http://www.ssfirearms.com/

 

[rickjf]

Thanks for the responses!!!!!!

 

[CaptainKirk]

Why, soitenly! :grin: