• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Lyman .50 Trade Rifle

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Aug 25, 2007
Messages
3,746
Reaction score
5,347
This Lyman Trade Rifle is .50. Externally, it is probably 95%. Very good blue and a few minor bumps and bruises on stock. The bore will need work. It is uniformly pitted end to end. I improved it with some vigorous scrubbing with pieces of a Scotchbrite Pad. Additional lapping with a minie' style bullet with decreasing grit polishing media an option. Filling bore with Evaporust will remove high spots that cause drag. In any event, I think it will clean up as a good conical shooter. PRBs, probably require swabbing between shots. Priced for sweat equity you need to put into it. $300 SHIPPED.
IMG_20220707_062917650.jpg
IMG_20220707_063038053.jpg
IMG_20220707_062930188.jpg
IMG_20220707_063045941.jpg
IMG_20220707_062939585.jpg
IMG_20220707_063051852.jpg
IMG_20220707_062956170.jpg
IMG_20220707_063309340.jpg
IMG_20220707_063452615.jpg
 
Last edited:
Status
Not open for further replies.

Latest posts

Back
Top