WANTED Lyman 575213 PH Mold

[sharpendjay]

Looking to find a Lyman 575213 Mold preferrably the one made for Parker Hales.

Thank you

 

[ADK Bigfoot]

How about a real live P-H Mold? Sold my 2-bander, still have the mold. Marked 58560. Flat topped hollow base plug. In Excellent condition.

ADK Bigfoot

 

[ADK Bigfoot]

I sized the above with a .577 sizing die (push through type) that I can include if interested.

ADK Bigfoot

 

[sharpendjay]

Thank you! How much do you want sir, I would take the sizing die too! What size is it ayway?

 

[sharpendjay]

never mind that question you already said the sizing die was .577. So this is not a lyman PH? Who makes this mold?

 

[ADK Bigfoot]

It came with the PH Enfields in the 1970s.. There are no markings except P-H and 58560 and UU. I believe it casts a .580 that is sized to .577. I also shot the Rapine .580 315 gr WC sized to .577 from that gun; it was a killer at 50 yards over 35 grains of 3Fg. (I have that mold, too.).

ADK Bigfoot

 

[sharpendjay]

I would be interested in both, I could use a wadcutter too. LMK what you want for both?

 

[ADK Bigfoot]

PM sent.

ADK Bigfoot

 

[jimairwin]

Looking to find a Lyman 575213 Mold preferrably the one made for Parker Hales.

Thank you

575213 is the original Lyman mould for Springfield (and similar) US rifle muskets.
Parker Hale (Enfield) moulds are 577 dia and a very different design.

 

[sharpendjay]

https://www.midwayusa.com/product/1010240940
So you want a minie that is 1-2/1000ths less than the lands. PH are .577 at the lands. Often a mold makes a bullet a little larger than its size. These are great bullets for the 1/48 twist, The heavier the better with the short twist rate.

575213 is the original Lyman mould for Springfield (and similar) US rifle muskets.
Parker Hale (Enfield) moulds are 577 dia and a very different design.