ElkStalker
40 Cal
- Joined
- Nov 22, 2021
- Messages
- 272
- Reaction score
- 424
Reposting as the comments have been shut off on my original post, probably due to my absence. Rifle is still available. I apologize for my absence. We had some emergencies here at home and I just got overwhelmed with dealing with it all. My apologies.
Lyman GPR 50cal is from 1991. I bought it used and installed Lyman front bead and Lyman 37ML sight. The original sights will also go with it.
I do not think it had been fired much if at all when I got it. The bore is really bright. No pitting. There is some minor pitting on the exterior of the muzzle at crown, likely due to poor storage by previous own? I can only guess what it’s from. Maybe from powder burn that was not properly cleaned. There is some light pitting near the nipple as well. Other than these 2 spots, the metal finish shows some ware. The wood is great. The bore was a patch cutter and took some time for it to smooth out. It has now calmed down and started shooting really tight groups. I took a doe with it last year.
The factory ramrod had some runout and snapped, so I replaced it with a TOW brown fiber rod. The issue here is that the new rod is thinner than the original, and since this rifle was pre-rod retention spring, it will slide out without the leather lace areound the barrel. It would be easy to replace with a thicker hickory rod, I just haven’t done it since the leather works fine. Unfortunately, I don’t have a good way to photograph the bore. My only bore light is one of those flexible designs that lights from the muzzle.
$600 + shipping. Or best offer!
Lyman GPR 50cal is from 1991. I bought it used and installed Lyman front bead and Lyman 37ML sight. The original sights will also go with it.
I do not think it had been fired much if at all when I got it. The bore is really bright. No pitting. There is some minor pitting on the exterior of the muzzle at crown, likely due to poor storage by previous own? I can only guess what it’s from. Maybe from powder burn that was not properly cleaned. There is some light pitting near the nipple as well. Other than these 2 spots, the metal finish shows some ware. The wood is great. The bore was a patch cutter and took some time for it to smooth out. It has now calmed down and started shooting really tight groups. I took a doe with it last year.
The factory ramrod had some runout and snapped, so I replaced it with a TOW brown fiber rod. The issue here is that the new rod is thinner than the original, and since this rifle was pre-rod retention spring, it will slide out without the leather lace areound the barrel. It would be easy to replace with a thicker hickory rod, I just haven’t done it since the leather works fine. Unfortunately, I don’t have a good way to photograph the bore. My only bore light is one of those flexible designs that lights from the muzzle.
$600 + shipping. Or best offer!
Attachments
-
9A5F1450-9117-46D8-B141-52F6BE853394.jpeg -
748F942D-E564-45E5-AA60-8DC2E75F4E6F.jpeg -
7B3F13E1-7FE0-43D1-81C9-A5402DE02A11.jpeg -
82052701-501D-41C3-A41D-F7E919E5AA28.jpeg -
F1BBFFD8-C165-4BA1-A2DC-4142A64FAD14.jpeg -
32DC9EA0-60BE-41B1-8024-10B82F56EF08.jpeg -
23D5D130-9836-41CD-A23D-3A06D719ACB5.jpeg -
409FA1C4-D28A-4900-B9AF-28B7A6979F65.jpeg -
6F43C2F5-8BB8-45D8-9311-4FA19D387A88.jpeg -
72F9A7FF-BFDA-482E-8E2C-A748F8605F47.jpeg
Last edited:
