ShootistJack
To Hunt Is To Live
I hope the process and end result provide Great Enjoyment, and I'm fully
expecting THAT'S exactly what you'll ultimately report to us!
expecting THAT'S exactly what you'll ultimately report to us!
Made the Kibler Leap
- Thread starter winter1857
- Start date
Help Support Muzzleloading Forum:
So the experiments have started. I've got one scrap piece wrapped in an undershirt in the back of my closet avoiding as much light as possible as a control piece. (Maybe that's a little nuts but hey....) I've got one piece on the dashboard of my truck catching UV for the foreseeable future.
I tested one piece this morning using some Minwax stain I had on hand. One side is Red Chestnut and the other is Sedona Red. I like them both as a stain for cherry but neither are what I'm looking for in a gunstock. Red Chestnut just looks like walnut and the Sedona just isn't right, either. Anyway, I have no intention of staining this rifle with Minwax of any kind.
The bottom picture is with oven cleaner I bought this morning. It's also very nice but again, not what I'm looking for. My eyes at 57 aren't what they were but it has an orange tinge to me. (My wife sees this as well.)
I'm going to let these dry for a day and apply some Tried and True finish and see what happens.
I tested one piece this morning using some Minwax stain I had on hand. One side is Red Chestnut and the other is Sedona Red. I like them both as a stain for cherry but neither are what I'm looking for in a gunstock. Red Chestnut just looks like walnut and the Sedona just isn't right, either. Anyway, I have no intention of staining this rifle with Minwax of any kind.
The bottom picture is with oven cleaner I bought this morning. It's also very nice but again, not what I'm looking for. My eyes at 57 aren't what they were but it has an orange tinge to me. (My wife sees this as well.)
I'm going to let these dry for a day and apply some Tried and True finish and see what happens.
A couple mores experiments this afternoon.
Top board is oven cleaner left for 5 minutes. This looks awful. Clearly, no good.
Bottom board is oven cleaner sprayed on and immediately wiped off and then wiped down with a vinegar soaked paper towel. Not as dark as my first oven cleaner test this morning but still has that orange tinge. I don't dislike it but I wouldn't care to have a rifle stock this color.
Still have plenty of cherry scraps to work on so the testing will continue. I've ordered some Laurel Mountain Forge Cherry stain as I want to give that a try.
Top board is oven cleaner left for 5 minutes. This looks awful. Clearly, no good.
Bottom board is oven cleaner sprayed on and immediately wiped off and then wiped down with a vinegar soaked paper towel. Not as dark as my first oven cleaner test this morning but still has that orange tinge. I don't dislike it but I wouldn't care to have a rifle stock this color.
Still have plenty of cherry scraps to work on so the testing will continue. I've ordered some Laurel Mountain Forge Cherry stain as I want to give that a try.
longcruise
70 Cal.
Following your stain experiments.
It's nice to have someone else obsess about this for us.
It's nice to have someone else obsess about this for us.
Following your stain experiments.
It's nice to have someone else obsess about this for us.
I love this part! I'm as happy as a hog in cool mud.
longcruise
70 Cal.
I've been thinking of a cherry stock. Not necessarily a Kibler but this is of great interest to me.
I'm very curious to see what the piece on the dash of my truck will look like in a couple of weeks. This method appeals to me the most, I think. Just let the wood be what it's going to be.
longcruise
70 Cal.
Pete G
76 Cal.
You are learning why so few originals were stocked in cherry.
As you say, I think I'm learning something. It seems cherry has been used widely many hundreds of years for furniture but hardly at all for gun stocks.
As much as I enjoy the experimentation I think I may end up with a Tried and True finish over natural wood. There's a lot to be said about letting the wood find its own tone.
The testing continues. The cherry block on the dash of my truck is becoming noticeably darker. I'm very optimistic.
Today I spread a couple of fingertips of the Tried and True Traditional linseed oil and beeswax on another piece. Thin coat. THIN coat.
This is going on the dashboard as well to see how it does with coloration.
Today I spread a couple of fingertips of the Tried and True Traditional linseed oil and beeswax on another piece. Thin coat. THIN coat.
This is going on the dashboard as well to see how it does with coloration.
kansas_volunteer
45 Cal.
You might try potassium dichromate it's supposed to work well on cherry. I bought some on ebay. I've never used it cherry, but it does darken other woods different shades depending on species. If you try it mix varying strengths to test. To my way of thinking a way to rapidly darken cherry by light is to take it to a tanning salon and let the strong UV do the work.
While I'm sure it would work, I'm unlikely to be the guy that goes to a salon to ask to put some blocks of wood in a tanning bed! The dash of my truck is UV enough for me.
user 34300
54 Cal.
- Joined
- Nov 25, 2019
- Messages
- 1,743
- Reaction score
- 2,126
Your truck windshield is probably made to block UV.
Agreed. Leave the sample out on the picnic table in the yard.
Wow. I hadn't even considered that. Thanks, Gents.
Winter, the piece you did with the oven cleaner, what brand was that and how long did you leave it on? I like it! I have a kit on order with a cherry stock and wouldn't mind that at all. Thanks, Rich
I used Easy Off I got at the grocery store. I didn't spray it on directly but sprayed it on a cloth rag and painted it evenly on each piece.
Top picture was probably 60 seconds and then wiped off.
Top board in the bottom picture was left on for 5 measured minutes. Not good.
The bottom board was painted on and rubbed off almost immediately and then wiped down with a vinegar soaked paper towel.
I like top and bottom but they both have an orange tinge that doesn't show up well in these photos.
Top picture was probably 60 seconds and then wiped off.
Top board in the bottom picture was left on for 5 measured minutes. Not good.
The bottom board was painted on and rubbed off almost immediately and then wiped down with a vinegar soaked paper towel.
I like top and bottom but they both have an orange tinge that doesn't show up well in these photos.
Thanks Winter, appreciate it!
Similar threads
