As requested from another thread on blankets.
HOW TO MAKE A MOUNTAIN MAN SLEEPING BAG
(In the 1980’s I saw a sleeping bag like this in a museum and wrote up a more lengthy article about it that was published in the, now defunct, Buckskin Report)
It is well recognized that loft often contributes more to warmth than the material. This is true in coats or sleeping bags. I’m sure this concept has been recognized since the early dawn of human history.
That concept is what this sleeping bag utilizes to keep our mountain man of yore warm in the winter.
For materials, you will need three, or more, wool blankets. Only two of them need to be in good condition. The others can be scrap. Needles and some kind of thread are also required. Scissors can be helpful but are not a requirement.
Using the scrap blankets, cut or tear all into strips. Width is not critical, anywhere from 2” to 4” wide is fine.
Once your strips are made lay one blanket out flat. Then using the strips, weave them in a basket fashion on top of the blanket. Short pieces of strip can be sewn in place to prevent movement.
When the entire blanket is covered with the new ”˜strip’ layer put the second blanket on top. Then sew it all in place making sure the inside basket weave layer is secured to prevent bunching.
Once that is done fold in half lengthwise and sew the foot end closed then do the same on the open side about one half to two thirds up.
Now you have a nice warm sleeping bag.
I’m sure some of you will be thinking since it is all sewn inside, stuff other than wool blanket can be used. That is true, it is out of sight. Synthetic blankets would work. And even plastic sheeting could be put in there. Personally, I would avoid the plastic since it does not breath.
HOW TO MAKE A MOUNTAIN MAN SLEEPING BAG
(In the 1980’s I saw a sleeping bag like this in a museum and wrote up a more lengthy article about it that was published in the, now defunct, Buckskin Report)
It is well recognized that loft often contributes more to warmth than the material. This is true in coats or sleeping bags. I’m sure this concept has been recognized since the early dawn of human history.
That concept is what this sleeping bag utilizes to keep our mountain man of yore warm in the winter.
For materials, you will need three, or more, wool blankets. Only two of them need to be in good condition. The others can be scrap. Needles and some kind of thread are also required. Scissors can be helpful but are not a requirement.
Using the scrap blankets, cut or tear all into strips. Width is not critical, anywhere from 2” to 4” wide is fine.
Once your strips are made lay one blanket out flat. Then using the strips, weave them in a basket fashion on top of the blanket. Short pieces of strip can be sewn in place to prevent movement.
When the entire blanket is covered with the new ”˜strip’ layer put the second blanket on top. Then sew it all in place making sure the inside basket weave layer is secured to prevent bunching.
Once that is done fold in half lengthwise and sew the foot end closed then do the same on the open side about one half to two thirds up.
Now you have a nice warm sleeping bag.
I’m sure some of you will be thinking since it is all sewn inside, stuff other than wool blanket can be used. That is true, it is out of sight. Synthetic blankets would work. And even plastic sheeting could be put in there. Personally, I would avoid the plastic since it does not breath.