• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Making an antler powder measure

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Mar 22, 2020
Messages
83
Reaction score
448
I've posted this on some facebook groups and another forum page in the past. But for those that haven't seen this and like to make there own pieces this may help you some. I've seen examined over a hundred originals from super simple to really fancy. I was lucky enough to see Jim Dresslar's outstanding collection back when I was a young feller. Some folks will tell you they were made one way or another. I've seen enough to know they were as diverse back in the day and they are no hard and fast rules. I will tell you how most of the best ones were made though. Most antler measures had pretty thin walls at the opening. How thin most are less than 1/16". Most of the cavities are tapered from the mouth to the bottom. The thong holes can be tapered from each side like they were made using a knife and some have straight walls like they were drilled. I have found that soaking the antler in some hot tap water soften them up and it is easier to dig out the cavity. It will make it easier to engrave the surface also. I have a few tools that I use to do my antler work and you can see them in the photo below. If you do use a chisel like I do to dig out the cavity you need to be very carful or you will ruin your day in short order. I generally use a drill bit around 3/16" to make my starting hole for the cavity. For the thong hole I use something around an1/8" sometimes smaller depends on what will work. Sometimes I will use my knife to counter sink the thong hole to. I stain my measures when I'm happy with the shape and finish. I'm not going to get into the nitty gritty on staining and dyeing but will say this. I haven't found anything that I can say is the best. I have dyed multiple pieces with the same dye bath and will get a different color on each piece. Antler is like wood every one is unique and will work differently but similar. Here are a few of the measures that I have made over the years. Some are my own design and some are copies of old ones. I also have a drawing of how I do my measures to give a visual of how I go about things. Have fun and use you imagination making you next measure.
 

Attachments

  • DSCN3489.JPG
    DSCN3489.JPG
    1.1 MB
  • DSCN3490.JPG
    DSCN3490.JPG
    1.1 MB
  • thumbnail_DSCN4239.jpg
    thumbnail_DSCN4239.jpg
    372.6 KB
  • DSCN1414.JPG
    DSCN1414.JPG
    422.8 KB
  • DSCN1418.JPG
    DSCN1418.JPG
    380.6 KB
  • vpw6VpMo.jpg
    vpw6VpMo.jpg
    65.9 KB
Thanks for this. You do nice work. I was interested in trying antler work and was given a nice bunch of deer antler- you just got me re-inspired 🙂
Maybe start with something simple like this apple scoop,,,,,



We've seen what you can do with your hands and some tools,,, this should be well within your basic abilities.

Screenshot_20240224-084342_Instagram.jpg
Screenshot_20240224-084332_Instagram.jpg
Screenshot_20240224-084351_Instagram.jpg
 
I have a good set of 5x5 bull elk antlers from a bull I arrowed two years back. All the other sets I either gave away or are sun bleached. I just think that you would need some pretty good girth to make a reasonably sized powder horn and not just a priming horn.
Very nice work!
 
Years ago I made a powder measure from the tip of a pronghorn antler. The natural little curl at the tip was easy to carve into the shape of an eagle beak and head. I carried that measure for years, tied with a throng to the buckle on my shot pouch. Then, one day after a hunt, I realized it was gone! I backtracked and searched for hours, but never found it.
The measure I use now, I made from a deer's femur bone. In my bag I keep a spare that I made from a deer antler.
 
Back
Top