Maxi Ball mold help

[BigHoss]

I bought this mold recently and was curious if anyone had any information on it. I haven’t been able to find any information on it. Thanks

 

[tenngun]

I never had use for conicals, but that look to me like the TC mold made by Lyman

 

[rusticbob]

Looks like a T/C maxi ball mold, probably .32 or .36

 

[BigHoss]

I was told it was a 50cal mold I just couldn’t find any information on it

 

[nit wit]

I have a .50 maxi, I'll trade if you want.
NW

 

[BigHoss]

I have a .50 maxi, I'll trade if you want.
NW

I think that’s what this is. I measured across what would be the base of the bullet and it just a sliver wider then a 1/2”

 

[Grenadier1758]

The mold will fit the Lyman small handles. Information on the T/C Maxi-Ball can be found in the on line T/C manual for their traditional muzzleloading rifles.

Here's a thread that was on the Forum discussing T/C Maxi Balls.

https://www.muzzleloadingforum.com/threads/maxi-ball-questions.153471/

Here's another thread with a link to the T/C user's manual with some information on the Mazi-Ball included. Note: Please apply a considerable amount of critical thinking on the contents of the manual.

https://www.muzzleloadingforum.com/threads/tc-hawken-users-manual-for-the-other-calibers.123158/

 

[BigHoss]

The mold will fit the Lyman small handles. Information on the T/C Maxi-Ball can be found in the on line T/C manual for their traditional muzzleloading rifles.

Here's a thread that was on the Forum discussing T/C Maxi Balls.

https://www.muzzleloadingforum.com/threads/maxi-ball-questions.153471/

Here's another thread with a link to the T/C user's manual with some information on the Mazi-Ball included. Note: Please apply a considerable amount of critical thinking on the contents of the manual.

https://www.muzzleloadingforum.com/threads/tc-hawken-users-manual-for-the-other-calibers.123158/

Thank you! Im still very new to muzzleloading.

 

[Grenadier1758]

@BigHoss, in the T/C manual, ignore the bore seasoning advice, (you can't season modern steel in gun barrels) and the so called clean out screw is not really a clean out screw, it is a plug from the manufacturing of the breech plug to drill a channel from the nipple seat to the powder chamber. Leave that screw alone.

 

[Rudyard]

I bought this mold recently and was curious if anyone had any information on it. I haven’t been able to find any information on it. Thanks

Well Its TC 'Maxi bullet mould ' they look ugly But they seem to shoot very well better results at least at 55 yards than a ball . I have a 50 cal one I think they came in 45 possibly 58 either way try it I did & found it excellent at the 55 yards . probably Lyman handles. Cant recall .Try it what size is it anyway ? Cheers Rudyard .
PS I see you have lots of info. but my bit wont hurt if its a bit over 50 maybe its a 54 I can use one of them R