Metal finish trigger assembly

[n_mcclintic]

Any input on finishing the trigger assembly without taking it apart

 

[Phil Coffins]

Nope.

 

[oldwood]

If I have a small part like a trigger assy. , Since most old guns are dark in color to start with. , I mostly use cold blue on the exposed parts , with a Que-tip. Clean the exposed surfaces with alcohol to remove any oils , or waxes. Put a light coat of blue on the parts. All will be well. Make sure to oil the areas that you blued.

 

[Mgbruch]

Yes, take it apart to finish the individual pieces. Especially if you're working with double set triggers. They're not that scary. If you're worried about getting everything back together properly, take a photo or two before you disassemble them.

 

[n_mcclintic]

Thanks for the input