• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

More five-board benches

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 4, 2004
Messages
8,756
Reaction score
3,829
Location
The Land of Enchantment
These are fun and easy to build out of common 1 x 12 and 1 x 4 pine. You can build off the photo, or from the discussion of this historic bench design in A.J. Hamler's "Civil War Woodworking," which is a neat book to have on the shelf. I posted about these in the non-ML forum up top, but they are lightweight and make useful camp furniture that is historically correct.
 

Attachments

  • image_50461441.jpeg
    image_50461441.jpeg
    789.5 KB
These are fun and easy to build out of common 1 x 12 and 1 x 4 pine. You can build off the photo, or from the discussion of this historic bench design in A.J. Hamler's "Civil War Woodworking," which is a neat book to have on the shelf. I posted about these in the non-ML forum up top, but they are lightweight and make useful camp furniture that is historically correct.
How tall are these? Tough to gage from the photo.
 
In 1960 I was a 12 year old kid in a 4-H woodworking club. I made, not a bench, but a foot stool that looks very much like your benches. I won a blue ribbon at the county fair with it, and a trophy at the state fair.
Almost 64 years later, we still have my little foot stool and use it often. Now, it is a battle-scarred veteran having survived my kids as they grew up.
 
I can't find a picture right now, about 30 yrs ago, I made a few such benches about 30 inches long and 12 inches wide, but I used 6 inch lumber for the length pieces along the front and back, included a board beneath those for a bottom and made the top with a hinges on back and a barrel bolt on front, so it opened for storage like a piano bench opens to store music, but the bench was deeper.. The barrel bolt held the front closed while lifting the bench around.
 
Back
Top