Mould or mold ??

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 21, 2004
Messages
1,387
Reaction score
2,169
When I write something about a bullet or round ball mould ... I try to use the spelling 'mould'. I see Mold used alot, but mold is that furry stuff that grows on your out of date bread or on wet damp basement walls. Should the word mould be the more proper spelling to use ??
Ohio Rusty ><>
 
The world is struggling with To vs Too.

There vs They're vs Their.

Your vs You're.

And now you want to throw Mould vs Mold into the mix.

Like the wise man said: Hold on to your butts.
 
British and American English have different rules when it comes to spelling the words. Americans omit the U that appears in some British words as a second vowel directly before a consonant. Therefore, mold ormould are a same word with same meaning and usage but different spellings.

In this article, I will differentiate between mold and mould by using them both in sentences with clear difference of the words acting as verb and noun respectively. At end, I would share a method to remember the difference between the two words effectively.

Origin:

The world mould originated from Middle English: apparently from Old French modle, from Latin modulus. In another sense, it originated from late Middle English: probably from obsolete mould, past participle of moul ‘grow mouldy’, of Scandinavian origin; compare with Old Norse mygla ‘grow mouldy’. One more sense of the word indicated its origin from Old English molde, from a Germanic base meaning ‘pulverize or grind’; related to meal.

Mould as noun:

Mould is used as a noun which means a hollow container used to give shape to molten or hot liquid material when it cools and hardens.

The smith would pour the molten metal into the shaped mould.

Mould as a noun also means a furry growth of minute fungi occurring typically in moist warm conditions, especially on food or other organic matter.

The bread had mould on it due to the moist weather.


Mould also means soft loose earth.

The ground was soft and damp, with old leaves thick in the mould.

Mould as verb:

Mould is used as a verb which means to form (an object) out of malleable material.

Mould the figure from white fondant.

Use of mold:

Mold is just American spellings for the word mould.


Examples:

Inside, the rain had spawned black, green, and yellow mold that crawled the walls. [Atlantic]

Obama has been more in the mold of George H.W. Bush and his secretary of state. [Daily Beast]

If some of the insulation is intact, leave it in place unless it is moldy. [Boston Globe]


Use of mould:

Mould is just the British version of the word mold with the same meaning and context.

Examples:

Without air conditioning in a highly humid climate, mould could form. [Montreal Gazette]

And Pretty Ballerinas is still making shoes in the mould of the original pair created in 1918. [New Zealand Herald]

There’s no bread, and even the mouldy cheese has been chipped away at. [Scotsman]


Mold or mould:

Mold or mould are a same word with altered spellings, indicating fungus or a container for molten liquid when acting as a noun, or the action of forming something as a verb.

British English to this day, uses mould while Americans prefer mold. Since mould has the alphabet U, just like United Kingdom, making it easier to quickly remember which of the two words to utilize accordingly.
 
I use both. Sometimes in the same post.
Just to pay homage :cool:

I've seen it spelled both ways by American mould makers. So if they can't decide, who am I? :dunno:
 
As a teenager I spent 5 years living in Ontario, Canada. That's probably why I scratched my head trying to figure out which spelling to use. Canadians follow many English spellings and pronunciations of words.

Now, how about "grey" or "gray"?

Chevy or Ford, etc.
 
While we're on the subject of English verses American spelling, what about pronunciation? I've noticed several times that words ending with an "a" are pronounced by (some at least) English "er". Where I've noticed it was names, Hoda, pronounced as "Hoder", even Savannah was pronounced "Savanner".
 
I was taught that a "mould" is used to make a "mold". For example, a "mould" is the object into which you pour molten lead in order to produce a lead round ball. The ball is the "mold", made from the "mould". And you guys thought you were just runnin' ball.............LOL!
 
Everywhere the British Empire hoisted her flag, pigeon languages developed... and they were not the only ones who experienced that. In our state of Hawai'i, you will hear Hawai'ian words used in largely English speech. I.e.: "You see that wahine (woman) bro?" Mold and mould are the same words with different spelling. We do not really speak English in America, we speak American... but American has different rules of spelling and plenty of words that migrated into the speech from other languages. Spelling and pronunciation get confusing at times. The area where I live in Wisconsin was once a French settlement. NOBODY around here knows how to pronounce French names that are found all over the area as street names.
 
Everywhere the British Empire hoisted her flag, pigeon languages developed... and they were not the only ones who experienced that. In our state of Hawai'i, you will hear Hawai'ian words used in largely English speech. I.e.: "You see that wahine (woman) bro?" Mold and mould are the same words with different spelling. We do not really speak English in America, we speak American... but American has different rules of spelling and plenty of words that migrated into the speech from other languages. Spelling and pronunciation get confusing at times. The area where I live in Wisconsin was once a French settlement. NOBODY around here knows how to pronounce French names that are found all over the area as street names.
You clearly are an observant gentleman Good on you .
Regards Rudyard
 
Everywhere the British Empire hoisted her flag, pigeon languages developed... and they were not the only ones who experienced that. In our state of Hawai'i, you will hear Hawai'ian words used in largely English speech. I.e.: "You see that wahine (woman) bro?" Mold and mould are the same words with different spelling. We do not really speak English in America, we speak American... but American has different rules of spelling and plenty of words that migrated into the speech from other languages. Spelling and pronunciation get confusing at times. The area where I live in Wisconsin was once a French settlement. NOBODY around here knows how to pronounce French names that are found all over the area as street names.
One of the companies I worked for several years ago was partially owned by a Japanese company. We always had Japanese engineers, they said American english was one of the hardest languages to learn because of all of the slang terms and phrases.
 
Having been a resident of England while working for Uncle Sam, I picked up many English traditions, word spelling and a bit of the language. When I returned to the States, my parents had difficulty understanding my speech.
But I still retain much of the spelling when writing here on the forum, i.e., mould, calibre.. petrol and others.
 
Having been a resident of England while working for Uncle Sam, I picked up many English traditions, word spelling and a bit of the language. When I returned to the States, my parents had difficulty understanding my speech.
But I still retain much of the spelling when writing here on the forum, i.e., mould, calibre.. petrol and others.
Well, most Americans can at least understand British... and even Scottish and Cockney! Irish English, though, is pretty difficult. When I worked at a gun shop, I was the only one who spoke any foreign language (German), so if anyone came into the store speaking anything other than English, they got me as everybody else was afraid of them.

Once a couple of young men came in and gravitated to the black powder section where I was working. The first man said, "He (the other man) is from Switzerland, and he is looking for reloading dies for some kind of rifle...." I turned to the other man and said, "Was fur Gewehr?" We continued the conversation in German until the transaction was complete. You want to make an instant friend? Just speak his/her language in a foreign nation!

Now the man with the thick Irish accent tried to speak to a female co-worker. Totally mystified, she turned to me, "Dale?" The young Irishman had to repeat just about every phrase, but eventually I got the message. Learning your first second language is difficult, but it helps you later on because you learn how languages work and you can usually plug what you know into the next one...AND you learn how to really listen closely.

My Arabic is mostly gone, and I only ever learned a few words of Mandariin. The times they are a changin', though, so I may yet be learning more than ni hao and shay shay. Hope I never have to learn to read Chinese though.
 
Back
Top