My eyes are going bad!

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Trooper

40 Cal
Joined
Mar 21, 2021
Messages
370
Reaction score
510
I know this might sound very unconventional, but I'm considering mounting a red dot sight on my hawken.. I'm at the stage where I have a very hard time focusing on the rear sight or the front sight.
Where do I go from here? Is there a picatinny or weaver rail I can mount on the barrel that will allow a red dot sight? and if so, where would you mount it?
 
One of my rifles has a fiber optic front sight and a ghost ring rear. Works good for me.
If you were to mount a scope you'd have to consider the hammer position and have your scope far enough forward so not to interfere with the hammer.
 
If you need one put one on and have no qualms about it. To answer your question I personally don't know off the top of your head but if you let me know the model rifle I can look online for you.
 
There are flat plates for mounting onto pistol slides. I bet one of them could be used to mount it on a barrel. Any gunsmith could drill and tap it to make it work.
 
I had to put a red dot on my shotguns. I have a strong left eye, but am right eye dominate.
I get a crossed focus. The red dot fixed it.
But on the muzzle loaders, try a 'ghost Ring', along with the regular sights.
The big circle without the peep helps focus the eye.
 
Couple years ago , I was in the predicament where I couldn't see front , or rear sight let alone the target. Cobbled up a simple tang peep sight , and it was a miracle. I can shoot again.
 
Couple years ago , I was in the predicament where I couldn't see front , or rear sight let alone the target. Cobbled up a simple tang peep sight , and it was a miracle. I can shoot again.
I’d love to locate a tang peepsite for my TC. I’ve scoured the internet for one with no luck.
 
One of my rifles has a fiber optic front sight and a ghost ring rear. Works good for me.
If you were to mount a scope you'd have to consider the hammer position and have your scope far enough forward so not to interfere with the hammer.
I was thinking more of a red dot sight or a long eye relief scope.
 
Try a web sight aperturenmore.com....they claim to have T/C tang peep sights, also try eBay....found a few there as well. I have a T/C tang peep on my Hawken, not authentic but it’s what I need to be able to shoot.
 
I had to put a red dot on my shotguns. I have a strong left eye, but am right eye dominate.
I get a crossed focus. The red dot fixed it.
But on the muzzle loaders, try a 'ghost Ring', along with the regular sights.
The big circle without the peep helps focus the eye.
A pea sized piece of masking tape on some glasses could of fixed that!
 
Try a web sight aperturenmore.com....they claim to have T/C tang peep sights, also try eBay....found a few there as well. I have a T/C tang peep on my Hawken, not authentic but it’s what I need to be able to shoot.
They don’t ship
To
Canukastan ☹️
 
I have two Great Plains rifles with spare barrels. The spares are fitted with a scope mount base ahead of the action with LER scopes (pistol scopes) mounted in them for hunting. When removed and plugged, they are barely noticeable. They work fine and really help. A very simple job for a gunsmith (or any machinist) to drill and tap a couple of holes.

ADK Bigfoot
 
I have bought 3 red dots in the last year. I really like the 'shake awake' option long battery life, and they turn on when picked up.

No burning up the battery just sitting there.

I like the dot in a circle for faster centering.
 
Back
Top