My new to me "Bush Buster"

L & R
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Bad Karma said:
I wouldn’t do that… I’ve used them in a few different Roundball and combination twist rifles. Generally they shoot as well as ball. Sometimes a wool wad or card wad is required but they will shoot and hit harder than ball. I still have a few .54 ball-ets left and really wish they hadn’t discontinued them.
Click to expand...
I'll try them out later this week when I get back to the range. I've got some 50 and 54 caliber wads. Was just looking at the performance chart paper that was included with the pa conicals. If it's even close to accurate they have considerable more energy. My question is lubing them. Is lube required in the hollowed part or just the sides? I cleaned the grease off that they were packed in. Pretty messy.
 
Muzzle57 said:
I'll try them out later this week when I get back to the range. I've got some 50 and 54 caliber wads. Was just looking at the performance chart paper that was included with the pa conicals. If it's even close to accurate they have considerable more energy. My question is lubing them. Is lube required in the hollowed part or just the sides? I cleaned the grease off that they were packed in. Pretty messy.
Click to expand...
I’ve always used them as they came. If you cleaned them I’d substitute a beeswax and oil based lube of some sort. Oh, and just the sides.
Btw, I usually use the .54 wads in 50 caliber rifles, seems like they work better. I could be fooling myself but I’ve always done so.
 
Last edited:
Working up my loads in the 54 cal thumpers, I found the 58 cal wads were superior to the 54 cal wads in both accuracy, velocity, and it lowered the standard deviation (SD) of the velocity strings.

I would expect you would see the same for the 50 cal with 54 wads.
 
Got a bunch of those I bought already cast. With 100 gr of FFFg Triple 7, I got good accuracy and results out of them, especially in the 1:32 twist barrel. I tried pushing them with 110 gr of FFFg T7, but the accuracy dropped off, but they came out at 1590 fps MV!

They are a back up round to my 485 gr No Excuses bullets at 110 gr. I don't use them as the primary as I simplified my carry bag down to 110 gr powder loads with either the 525 gr or 485 gr No excuses...depending one which gun I am carrying.

Below is out of the 1:38 twist 24" barrel. The attached PDF is for the ballistics. It does even better in the 1:32 twist 23" barrel and equally well in the 1:32 twist 22"

I am fairly sure that the horizontal stringing is an artifact of the type of hunting sight and the target type I was using. I have noted that I string horizontally on all of my groups at 100 yards. Having changed to a bullseye black target with a 5.5" black bull has reduced that significantly

450 24.jpg
 

Attachments

  • 54 450 1530fps.pdf
    298.2 KB
Last edited:
Bad Karma said:
I wouldn’t do that… I’ve used them in a few different Roundball and combination twist rifles. Generally they shoot as well as ball. Sometimes a wool wad or card wad is required but they will shoot and hit harder than ball. I still have a few .54 ball-ets left and really wish they hadn’t discontinued them.
Click to expand...
Shot the pa conicals today. About 25 or 30 of them. Tried powder loads of 60, 65, 75,80,90,,,2ff. With and without wads. This particular 1-66 barrel doesn't like them. Shot all over the map. Point blank at 12/13 yards it was fine. 50 yards about a 6" grouping. 100 yards, ain't happening! So i started loading patch n ball, good groups. Patch n ball will be what i deer hunt with next Saturday. 60 grains swiss 3fff with patch n ball oughta work.
 
Bad Karma said:
I wouldn’t do that… I’ve used them in a few different Roundball and combination twist rifles. Generally they shoot as well as ball. Sometimes a wool wad or card wad is required but they will shoot and hit harder than ball. I still have a few .54 ball-ets left and really wish they hadn’t discontinued
Click to expand...
 
Muzzle57 said:
Shot the pa conicals today. About 25 or 30 of them. Tried powder loads of 60, 65, 75,80,90,,,2ff. With and without wads. This particular 1-66 barrel doesn't like them. Shot all over the map. Point blank at 12/13 yards it was fine. 50 yards about a 6" grouping. 100 yards, ain't happening! So i started loading patch n ball, good groups. Patch n ball will be what i deer hunt with next Saturday. 60 grains swiss 3fff with patch n ball oughta work.
Click to expand...
Well heck, you had to spend a bunch of time finding that out… good news is you were shooting! ;-) Patched ball is a pretty fair fallback.
 
Bad Karma said:
Well heck, you had to spend a bunch of time finding that out… good news is you were shooting! ;-) Patched ball is a pretty fair fallback.
Click to expand...
That is the fun and interesting thing about ML..you got to shoot and shoot and shoot to find out what works for you and your intended hunting situation and match you gun, load and style to your hunt and game.
 
chorizo said:
That is the fun and interesting thing about ML..you got to shoot and shoot and shoot to find out what works for you and your intended hunting situation and match you gun, load and style to your hunt and game.
Click to expand...
Yep, it’s a slower pace which I find is relaxing but allows for a more intense focus on the shot process. In my experience shooting muzzleloading rifles and pistols has made me a betting shot.
 
Bad Karma said:
Yep, it’s a slower pace which I find is relaxing but allows for a more intense focus on the shot process. In my experience shooting muzzleloading rifles and pistols has made me a betting shot.
Click to expand...
I'll tell ya one thing, bifocals and open sights don't like each other. Least mine don't. Heading to the VA in the morning for eye exam and new spectacles maybe they'll help the cause a little.
 
Muzzle57 said:
I'll tell ya one thing, bifocals and open sights don't like each other. Least mine don't. Heading to the VA in the morning for eye exam and new spectacles maybe they'll help the cause a little.
Click to expand...
Not laughing at you… I’ve always had excellent eyesight, even in my dotage, but some days it just drives me nuts try to pick up the front sight clearly! I can spot a muley buck laying up under a juniper tree and not see the bead 30” from my face…

Somebody on this site recommended talking with the ophthalmologist about the particular needs of a shooter. We don’t need the close vision lens at the bottom of the lens, but rather at the top of the lens. Might be worth the conversaction.
 
This .70 cal. Danish Jaeger has been a great mountain rifle.
Weighs just 7lbs & has been deadly accurate with PRB on Idaho's big game out to 150 yds. with it's express rear
sights & 1 turn in it's swamped 32" barrel & 82 grns of 2F GOEX.

All original Jeagers I've owned & shot have featured faster twist rifling averaging one turn in the length of their barrels &
typically feature deeper rifling in the .012-.014 range to prevent skidding & patch blowout when properly loaded.

All of the big bore Jaegers I've owned with good bores have had deeper rifling & have produced tack driving round ball accuracy with a properly fitted patched round ball & load combination.
Rifles like the Jaegers with swamped barrels provide lighter weight, superb balance & faster sight acquisition while hunting.



Danish Jaeger img 2403.JPG
 

Similar threads

L
Problem with ignition on my new Hawken
2
Replies
23
Views
2K
user 34300
U
O
My Idaho elk hunt
2
Replies
30
Views
2K
Oregononeshot
O
Gilbert J Taylor
New 40 Cal
Replies
3
Views
284
Gilbert J Taylor
Gilbert J Taylor
S
Unfired New to Me ROA
Replies
4
Views
382
Smokerr
S
Hammond79
Dirty Betty Makes Meat
2
Replies
34
Views
3K
Hammond79
Hammond79

Latest posts

Back
Top