SOLD Navy Arms 12ga SxS Shotgun

[tworoosters]

Navy Arms Pietta Percussion 12 Gauge SxS, 28" barrels, 7lbs 7.9oz Condition is like new, I'm sure it's been used but I don't even see any handling marks. Bores look great, locks feel nice, the wood is amazing. I've seen quite a few navy arms shotguns over the years and I've never seen one with stock figure like this. I don't know if there was a stock grade option back in the day or if it was just luck of the draw.

Reduced to $850 Shipped
I am flexible with payment type too if it's a concern in light of the recent issues of people getting hacked and so forth.

 

[smoothshooter]

Does it have chrome bores? ( Not a requirement for me )

 

[tworoosters]

Does it have chrome bores? ( Not a requirement for me )

I don't believe the Navy Arms guns have chrome bores.

 

[mustanger]

I don't believe they do either. Neither do the older Pedersoli's. They started chroming the bores in recent years. It's a nice option, but you don't really need to have it. Just keep them clean. I've got one with non chrome and one with chrome and they shoot the same. That is about the nicesest stocked shotgun I've seen for a while. I sure like it. Pretty gun. Nice price too!

 

[brewer12345]

I assume no choke/cylinder bore?

 

[Gkarp429]

Pm sent

 

[William Lincoln]

Nicest SxS in awhile. What are the bores? Chokes?

 

[tworoosters]

Cyl bores. I don't think the Pietta Navy Arms guns had a choke option at least not in a standard model.

 

[Eterry]

Cyl bores. I don't think the Pietta Navy Arms guns had a choke option at least not in a standard model.

I have a 12Ga Navy Arms SXS T&T (Turkey and Trap) that is choked. I'd have to dig it out to see who made it.

 

[rickpa]

The old pot metal bridles can be replaced with the Pedersoli bridles from the newer double shotgun. VTI has them listed at $44.10. I have an old Pietta that broke the right bridle and made a new one from stock using hacksaw and files and a drill press. It's not hard to do........... Items 13 and 28 for bridles......https://www.vtigunparts.com/store/shopdisplayproducts.asp?id=211&cat=L241+%2DDouble+Barrel+Shotgun+12+ga%2E

 

[tworoosters]

I'm not particularly interested in pulling the locks off, so you'll have to refer to internet wisdom on the bridle front. That's also not an issue I'm familiar with personally.

 

[tworoosters]

Try not to turn my ad into a discussion about Pietta locks. Also both bores are the same at the muzzle, so unless someone knows something I don't, I'd say they're not choked. Here's a picture of the markings on the bottom of the barrel set as well.

 

[tworoosters]

Please Re Read the posts. I never said anything about the availability of bridles, that was another member. My gun has no issues whatsoever, stop implying that it's somehow not useable because you couldn't get a part for yours. Do not accuse people of misleading before you read and comprehend the entire thread.

 

[Sparkitoff]

Confirm the weight is 7 pounds 7.9 ounces? I was hoping for one of the early lightweight guns.

 

[tworoosters]

Confirm the weight is 7 pounds 7.9 ounces? I was hoping for one of the early lightweight guns.

I put it on my scale this morning to re check it and it was reading 7lbs 7.5oz. so it's right in that range +/- an ounce or two.

 

[Frontier's]

wow!! gorgeous shotgun

 

[toot]

a nice shotgun!

 

[jaguarxk120]

I have one of the early guns from Davide Pedersoli , the double does have chrome lined bores and is choke bored.
The stock is of nicely grained walnut with the flat style checkering.
Vintage is about 1974 and it weighs about 5 pounds, a joy to carry in the field.

 

[Woody Morgan]

Fer cryin' out loud. Will everyone just shut up and someone buy this shotgun before I have to??

wm

 

[Silvertip8k]

Most beautiful sbs I've seen in a long time...why is it stuff like this always pops up when im broke?