New Uberti 1861 Navy from Midway. Buyer Beware!

[Blackpowderwarrior]

The last Uberti I bought from midway left the proof house without the arbor having been staked at all. Wide open hole as soon as you cock the hammer. The arbor easily screwed right out.

Midway wouldn't take the return and the gun ended up being one nice piece after being overworked again.

 

[AlexB]

My wife manages to get the cylinder out of her nma quickly and easily every time she reloads on her press even when fouled............just sayin.

 

[Jedidiah]

Our range requires the cylinders to be out of BP revolvers for a cease fire.

I can pop the barrel and cylinder off the 47 Walker in a heartbeat. Once tap with my wood piece, pull the wedge over and a bit of pressure with the rammer in between the chambers and its a done deal. It sounds like far more time than it takes.

On the other hand the ROA is not as fast. And you got to be careful the Rammer parts don't go a flying.

I thought the Colt style was dinosaur like and its not, its an impressive design. It looks crude and weird but its an effective solution to getting a BP revolver to work.

I have yet to be able to see the hammer sight move, I am sure some day I will catch it doing that and confirm its the hammer sight notch that is causing me to shoot badly!

And the Colt style does not require fideling with the cylinder to get it out of the gun, it simply goes off the end of the Arbor.

Don't get me wrong, I really like the ROA and the NMA, its just that I don't see the Colt as 2nd rate now.

The Colt has too many parts to juggle for me. Wedge, barrel, old cylinder,new cylinder..Oh my!! On my Rem 58's everything stays where it should, except the cylinder which comes in and out with no problem after I learned how to do it.

 

[45D]

The Colt has too many parts to juggle for me. Wedge, barrel, old cylinder,new cylinder..Oh my!! On my Rem 58's everything stays where it should, except the cylinder which comes in and out with no problem after I learned how to do it.

Nah !!! I just open a gate to load and unload . . . easy peasy . . .

 

[CaptainVane]

.

 

[BeardedGunsmith]

The key to getting the remington cylinder in and out is to do it when it's NOT at half cock. Just barely pull the hammer back enough that the anvil is out of the frame and the cylinder rolls in and out. I'm also really surprised to see grown men asking for a thread to be closed. It's as unnerving to see that certain words pertaining to particular bullets and parts can't be mentioned here either.

 

[CaptainVane]

So I just tried it again. 8 minutes.
In that time I could have disassembled, clean, reassembled, loaded and fired all 6 from my Colt. Screw it, that Rem is never coming apart again.

 

[BadDaditood]

I struggled with Rems for awhile until some lady showed me how.
I still prefer the Colt’s grip (Ubertis), and mine only come apart in 3 pieces, the wedge Never leaves the bbl assembly.

 

[Zilla]

Just received a "brand new" Uberti 1861 Navy in the mail today. Several years ago, I purchased a 1862 Police from Midway, and it came with a corroded and pitted barrel, and obvious signs of use without cleaning. After MUCH haggling I was able to get my money back. Figured it was a "one-off", so when I saw a sale on the Uberti 1861 Navy, I decided to chance it.

Well, here is the result. The box it came in looks like it has been tossed around a warehouse for the last two decades. I opened the plastic, and there was a noticeable lack of the slimy oil that I have grown use to when opening a new revolver. As you can see in the pics, there is rust around the nipples, and also around the front sight. That is on Midway, and I was aware of their "No Return" policy on black powder guns. They got over on me, but it will be the last time, I can assure you of that. Shame on you, Midway!

Now, for the gun itself, it is not so nearly as nice as the last Pietta (1851 Navy .44 Sheriff's Model) I bought a year or so ago. The fit and finish was of much lower quality than previous Uberti's I own. I am stuck with the gun due to Midway's policy, and I will clean and polish it up. Hopefully it will shoot well. Haven't had the barrel off yet to see if it rusted or pitted, crossing my fingers. Just a shout out to let folks know my now two time experience with Midway, and the Uberti's they sell. View attachment 303035View attachment 303036View attachment 303039View attachment 303040

 

[Smokerr]

Half cock is what you should be able to do. If it does not work, then you have a timing issue. Either the bolt, the hand or even both.

All mine work at half cock though the ROA is a tad iffy at times.

I can knock apart the Walker quicker than I can take the cylinder out of the ROA.

Remington about the same as the Walker.

I do like the Walker as you don't have to futz with the Hand and rolling the cylinder, tap out the wedge and pull the barrel off and the cylinder comes off.

My cylinder do come out ok but they also hange up, its not the bolt (now) so it may be the hand.

Regardless, if you struggle with the cylinder removal, then its got an issue and if you can solve send it to Mike.

 

[Blitz]

If it were me, I'd be on the phone demanding a return, if the operator plays the corporate 'no return' play line, I'd demand to talk to her boss, maybe even up to Larry Potterfield himself. No excuse for sending a buyer something in that condition if it is rust. As 'Sam' posted, sure it isn't red grease? I bought a new Pietta 44 US Marshall from EMF not long ago and there appeared to be rust in two of the cylinders. Called the California office as I didn't want to tear down and void any warranty. Guy at EMF advised to check if it was loose material as sometimes when the factory polish's the cylinders, they don't get all of the red rouge out. He advised to call back if rust. Checked, sure enough, dried red rouge material, cleaned up, cylinder was bright and shiny.

I f paid by cridit card try your bank or card issuer .
I Have had great satidfaction ftom my cridit union Vasa card isssuer on several occasiond goy my money returned from several not quite right purchases .

Blitz

 

[[email protected]]

If paid by credit card, try your bank or card issuer.
I have had great satisfaction from my credit union Visa card issuer on several occasions got my money returned from several not quite right purchases.

Blitz

There, FIFY.