Onojutta
45 Cal.
Can oak dowels be used for fowler ramrods, or does it have to be hickory?
Oak ramrod for Fowler?
- Thread starter Onojutta
- Start date
Help Support Muzzleloading Forum:
Oak is hard and brittle which will be prone to break.
Hickory is sturdy with flexibility. Not so likely to beak in normal usage.
Hickory is sturdy with flexibility. Not so likely to beak in normal usage.
longcruise
70 Cal.
Also depends on having straight grain. You would probably have to pick through the stock of dowels to come up with a good one. Durability would also depend on how you use it and how tight your load is.
Any rod can break. The secret is to use short strokes and and push near the muzzle.
Any side force can break a rod. Hickory is more resilient
I’ve used 7/16 and 1/2 inch wiping sticks without trouble. A 3/8 rod that’s found on so many guns is easy to break in oak. And in hickory you need use it right.
Any side force can break a rod. Hickory is more resilient
I’ve used 7/16 and 1/2 inch wiping sticks without trouble. A 3/8 rod that’s found on so many guns is easy to break in oak. And in hickory you need use it right.
ArmorerRoy
40 Cal
While it is tempting to get a dowel from Lowes/ Home Depot it won’t be as good as if you order one from Track of the Wolf.
A Fowler, using wads and shot, needs far less force to load than a rifle, so you might be fine with an Oak ramrod/wiping stick, if you haven’t access to a better hickory one.
(If however you plan on loading a patched round ball, the Oak might not work out as well unless you have one with a perfect grain.)
If you decide to order a good quality
ramrod then get a few. The extras may be needed somewhere down the road.
(If however you plan on loading a patched round ball, the Oak might not work out as well unless you have one with a perfect grain.)
If you decide to order a good quality
ramrod then get a few. The extras may be needed somewhere down the road.
FlinterNick
70 Cal.
- Joined
- Nov 1, 2018
- Messages
- 4,021
- Reaction score
- 3,078
Oak is tricky.
Red Oak is the most common.
White Oak very good for a ramrod, I use white oak to make canteen frames.
Vs. Hickory White oak is more expensive and the quality isn’t as good as a hickory rod
Other types of good woods are Ash, Black Locust and Yew and Osage. Yew is the most flexible and was used on English long bows.
- Joined
- Mar 23, 2021
- Messages
- 3,187
- Reaction score
- 6,830
Go to TOTW, buy about six hickory ramrods, use the straightest grained one you can for your ramrod. In about a year or so the rest will be used up on other projects that you need a good section of rod for. Short starters et. etc.
Might as well order six. Ask for straight grain. Any bundle less than six requires a backing board to prevent damage in shipping and the cost in postage almost equals the cost of the other 5 ramrods.
Last edited:
My woodworking experience tells me oak is a brittle wood. My muzzleloading experience tells me a STRAIGHT grain ramrod will last for decades and thousands of rounds if you don't do stupid stuff with it.
