Old Pistol

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The Disston medallions read singular: H. Disston and Son until 1871, when it was changed to Sons. The large letter A at the end of PHILADA was added in the 1880's. The medallions then remained relatively unchanged through 1917. The pistol is a nice little muff gun and the medallion is lagniappe.

its a cool little item, probably not worth much. Think it will be kinda neat in a box with the 1858 (now that it’s confirmed).
 
Is it worth anything as collector or just like a $200 shooter? Just want to mess up a collector item.
The frame appears to be in good shape & If the bore & cylinder are also good it has considerable value as a collectable even though it's been refinished & grips have been replaced.
Repro 58 Remingtons that were made a few years back for competitive shooters with 'progressive twist rifling' remain highly prized. They sold for approximately $1,200 new.
If the action on your revolver is tight & correctly timed with a good shootable bore & cylinder it's worth more to those of us who enjoy collecting & shooting a piece of our history.
 
The Remington does appear to be a refinished original to me as well. I have encountered a fair number of original cap & ball revolvers that were refinished at one time, probably as shooters. Before the reproduction industry got going that's all there was available. A worn or slightly rusted old gun could be refinished to make a nice, presentable shooter. In the 40's or 50's when interest in actually shooting the old guns was growing it was probably easier and still less expensive than buying a higher grade example for such use.

The visible marks appear to be mainly inspectors stamps. Originally there would have been a Remington factory stamp on the top barrel flat, many of these I've seen were fairly shallow. Easy to lose when polishing for a refinish. The location of the serial number on the bottom barrel flat looks correct. The only oddity I noticed was in the cylinder pin pic there appeared to be some type of Crown over a letter stamped? A replacement part maybe? Some of these guns went to Europe in the years after the civil war. France for example bought a lot of US surplus during the Franco-Prussian war. The gun may have spent some time over there, the mark looks like a European inspectors stamp.
 
Thank you very much. I wanted to shoot it since I never shot black powder before, but wasn’t sure if I should depending on the value of it. I am currently building a display box for the two guns so if nothing else they can look nice together. I do need to order a couple screws to replace incorrect ones (the 1858). Other than that they have both been cleaned and oiled to stop and prevent any further decay. All wood was treated with boiled linseed oil.
 
Here’s another one for you guys, I forgot about this one sitting next to my safe. My grandparents found in an attic of a house they bought back in NJ around the 60’s. I have not disassembled it, just wiped it down.
 

Attachments

  • 7207F34E-FA3D-4E75-A6F6-A0B0B88A7F21.jpeg
    7207F34E-FA3D-4E75-A6F6-A0B0B88A7F21.jpeg
    130.4 KB
  • EA2021D0-7447-456F-876B-9A47FE91EC42.jpeg
    EA2021D0-7447-456F-876B-9A47FE91EC42.jpeg
    173 KB
  • D43BC214-3EC6-4283-8D77-7D545A1B081F.jpeg
    D43BC214-3EC6-4283-8D77-7D545A1B081F.jpeg
    60.4 KB
  • 4CA70665-C997-4B5F-A329-1161ACAB3A49.jpeg
    4CA70665-C997-4B5F-A329-1161ACAB3A49.jpeg
    121.7 KB
  • E013713F-7A67-4B43-87E2-261CD644862D.jpeg
    E013713F-7A67-4B43-87E2-261CD644862D.jpeg
    111 KB
  • C112E54D-BBEF-4E33-B161-2F0722DEBD9C.jpeg
    C112E54D-BBEF-4E33-B161-2F0722DEBD9C.jpeg
    79 KB
  • 810A9117-A87D-4932-9EEA-FB1B21BD988C.jpeg
    810A9117-A87D-4932-9EEA-FB1B21BD988C.jpeg
    113.6 KB
  • 7762E381-8449-4716-A6DD-331732C7EBD5.jpeg
    7762E381-8449-4716-A6DD-331732C7EBD5.jpeg
    114.5 KB
  • B8B38C72-95B8-4214-B309-B8C4DBCAD125.jpeg
    B8B38C72-95B8-4214-B309-B8C4DBCAD125.jpeg
    204.4 KB
Looks like an old fowling piece. Back action lock, barrel goes octagon to round. In the one pic from the side it looks like there might be a small oval stamp just forward of the engraving around the breech. About the size of the Belgian E over LG stamp. If so it's Belgian made or at least has a Belgian barrel, check it with a magnifying glass and a good light
 
Looks like an old fowling piece. Back action lock, barrel goes octagon to round. In the one pic from the side it looks like there might be a small oval stamp just forward of the engraving around the breech. About the size of the Belgian E over LG stamp. If so it's Belgian made or at least has a Belgian barrel, check it with a magnifying glass and a good light
This is the best pics I could get
 

Attachments

  • 94907F3F-26D7-4BD6-9E0C-146CE0310460.jpeg
    94907F3F-26D7-4BD6-9E0C-146CE0310460.jpeg
    93.5 KB
  • 492F8E0B-BD03-4875-8921-9D721764C0DF.jpeg
    492F8E0B-BD03-4875-8921-9D721764C0DF.jpeg
    91.2 KB
  • 292E7988-A586-4CB6-BC77-827987CFCB12.jpeg
    292E7988-A586-4CB6-BC77-827987CFCB12.jpeg
    91.4 KB
Here’s a updated pic of the 2 BP pistols. Built a box for them to be displayed till I decide what to do with them.
BD28B97D-1ECF-48E2-BFB6-5EFF96B7CA1E.jpeg
F6A9E448-01EA-418A-BA1C-71BBB6B4529B.jpeg
BD28B97D-1ECF-48E2-BFB6-5EFF96B7CA1E.jpeg
BD70E23A-0FF0-4A5B-BA81-F606E42A0FE5.jpeg
F6A9E448-01EA-418A-BA1C-71BBB6B4529B.jpeg
6766AD84-C362-4F05-8B25-65FF6FB89E0A.jpeg
 

Attachments

  • DEC7B344-05E9-43B0-A906-5AFDED2986E8.jpeg
    DEC7B344-05E9-43B0-A906-5AFDED2986E8.jpeg
    168.6 KB
  • 07725789-4C70-48A0-968A-298C6181311F.jpeg
    07725789-4C70-48A0-968A-298C6181311F.jpeg
    186.4 KB
Back
Top