I have an original .70 cal. Swiss Jeager that was originally a Flintlock then converted to percussion.
The lock plate is faintly scroll-engraved with the name Depre' in Geneva & bottom of the proofed barrel is stamped Blacmon Motagny.
Anyone have any info. on builder Depre' in Geneva or Blacmon Motagny ??
This rifle with it's 34" long rifled & swamped barrel is much longer than other original Jeagers I've collected, shot & observed.
The still perfect bore on this barrel has 16 groove rifling with 7/8 twist in it's 34"& should be a tack driver !
This rifle weighs in at just 7.25 lbs.
It has several usual features that leads me to think it might have been built to be a long range military sniper rifle.
The sport of long range target shooting was mostly reserved for the wealthy during the flint era & those folks normally had more ornate firearms built & were also weighed much more than this rifle.
The rifle weighs in at just 7.25 lbs.
This unusual rifle lacks any fancy embellishments that are normally seen on most custom Jeagers of that era, however it does have nice fiddleback figure through the whole length of it's walnut stock.
Sights on all of the Jaegers I've owned or observed have been coarse enough to be used in lower light forest conditions & often have just one tip-up rear sight blade.
This rifle has very fine sights & two extra rear flip-up leaves on the rear sight & a very fine front sight blade with a 'very long' sight base to drift for windage adjustments.
As photos show, the lock was setup for rapid removal. The lock is retained by a single thumb-screw & when loosened the front of the lock-plate pivots out on a metal hook & receiver setup in-letted in the wood recess. The thumbscrew would certainly catch on clothing if carried for hunting.
Possibly the rifle was designed for rapid firing, fast flint changes & lock cleaning ??
The unusual ball shaped protrusion on forward end of the rifle's trigger guard indicates it was designed to be used with a specific type of rest.
Anyone stateside or abroad on the forum have any input on this Swiss rifle's maker ???
Much thanks,
Relic shooter
No I haven't fired this rifle.. Unfortunately wear & tear on my 80 year old carcass advanced much faster than the rifle.
The lock plate is faintly scroll-engraved with the name Depre' in Geneva & bottom of the proofed barrel is stamped Blacmon Motagny.
Anyone have any info. on builder Depre' in Geneva or Blacmon Motagny ??
This rifle with it's 34" long rifled & swamped barrel is much longer than other original Jeagers I've collected, shot & observed.
The still perfect bore on this barrel has 16 groove rifling with 7/8 twist in it's 34"& should be a tack driver !
This rifle weighs in at just 7.25 lbs.
It has several usual features that leads me to think it might have been built to be a long range military sniper rifle.
The sport of long range target shooting was mostly reserved for the wealthy during the flint era & those folks normally had more ornate firearms built & were also weighed much more than this rifle.
The rifle weighs in at just 7.25 lbs.
This unusual rifle lacks any fancy embellishments that are normally seen on most custom Jeagers of that era, however it does have nice fiddleback figure through the whole length of it's walnut stock.
Sights on all of the Jaegers I've owned or observed have been coarse enough to be used in lower light forest conditions & often have just one tip-up rear sight blade.
This rifle has very fine sights & two extra rear flip-up leaves on the rear sight & a very fine front sight blade with a 'very long' sight base to drift for windage adjustments.
As photos show, the lock was setup for rapid removal. The lock is retained by a single thumb-screw & when loosened the front of the lock-plate pivots out on a metal hook & receiver setup in-letted in the wood recess. The thumbscrew would certainly catch on clothing if carried for hunting.
Possibly the rifle was designed for rapid firing, fast flint changes & lock cleaning ??
The unusual ball shaped protrusion on forward end of the rifle's trigger guard indicates it was designed to be used with a specific type of rest.
Anyone stateside or abroad on the forum have any input on this Swiss rifle's maker ???
Much thanks,
Relic shooter
No I haven't fired this rifle.. Unfortunately wear & tear on my 80 year old carcass advanced much faster than the rifle.