• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Pan fence for a match lock muskett

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

OBwon13

Pilgrim
Joined
May 31, 2023
Messages
1
Reaction score
2
Location
Palm Coast, Florida
Dear fellow, shooting enthusiast’s,

My name is John Kevin O’Brien. I am a retired operations specialist, first class service warfare United States, Navy, 22 years, 1977, 1999.

I am saving up to buy a Matchlock muskett. I am trying to find a pan cover that has the hand fence to protect the shooter’s face, from the priming ignition action wants the lever or trigger is pulled. I have visited many sites on the Internet, and they have a lot of flash guard’s, which I have. But I am specifically trying to, upgrade the Matchlock rifle that I’m going to purchase soon with the addition of a pan fence. I assumed that I could just buy some angle iron and grind it down and drill some holes in the top of the pan, cover, and use small screws, and Loctite, to make sure that the pan fence is secured to the pan cover.

Does anybody, on the forum, know of a manufacturer or website that offers this kind of upgrade to a Matchlock rifle. This would be greatly appreciated.

Sincerely,

Operations specialist first class it was warfare, United States, Navy retired John Kevin OBrien, email is [email protected]
 
Welcome from Maine. This thread is for introductions only. If you post your question in the Pre- Flintlock thread you will surely have better results.
Nit Wit
 
Back
Top