JOHN L. HINNANT
45 Cal.
- Joined
- May 29, 2004
- Messages
- 711
- Reaction score
- 2
Greeting All,
Let me assure everybody that my posting was never intended to start a blow/swab debate/firestorm.
But, as Dixie Flinter stated,....."this is an important safety issue". There seems to always be a lot of new or inexperienced shooters on the forum, and while I see postings I do not agree with, I do not always jump to the keyboard to dispute them.
But then and again, one leaps out at me, and I think maybe I can make a difference. At least, I hope so.
This idea of blowing down the barrel is one of those. I personally do consider it to be a very unsafe practice, But knowing human nature, will not argue or debate with those who are set in their ways. The Lord knows I am set enough in my ways.
It seems to be a sad fact that new safety rules are put into place after a serious accident has happened; after a brief lapse of common sense that should have prevented the incident.
It was not that many years back a relative new shooter, at the NMLRA CHAMPIONSHIPS, using a bench rifle with a false muzzle failed to remove the false muzzle before placing the rifle on the bench. Only after capping and cocking the hammer, did he notice the false muzzle was still in place.
This gentleman in one of those brief lapses of common sense, reached out to the muzzle and began to remove the false muzzle. The lightly set trigger jarred loose, the rifle discharged with close to a 200 grain charge of 2FF Goex blackj powder, and a human hand was virtually destroyed.
Today the NMLRA and TMLRA has a range rule requiring ALL fasle muzzles to be secured to the loading bench with a safety line.
I suspect all of us have experienced one of those brief lapses of common sense and afterwards looked upward and said, "thank you for looking out for me".
Since I am the one who started this debate, let me try to stop it. Both sides of this issue have been stated, and neither side is going to be inclined to change or at least admit it.
So we can agree to disagree and move on to other issues.
Best regards,
John L. Hinnant
Let me assure everybody that my posting was never intended to start a blow/swab debate/firestorm.
But, as Dixie Flinter stated,....."this is an important safety issue". There seems to always be a lot of new or inexperienced shooters on the forum, and while I see postings I do not agree with, I do not always jump to the keyboard to dispute them.
But then and again, one leaps out at me, and I think maybe I can make a difference. At least, I hope so.
This idea of blowing down the barrel is one of those. I personally do consider it to be a very unsafe practice, But knowing human nature, will not argue or debate with those who are set in their ways. The Lord knows I am set enough in my ways.
It seems to be a sad fact that new safety rules are put into place after a serious accident has happened; after a brief lapse of common sense that should have prevented the incident.
It was not that many years back a relative new shooter, at the NMLRA CHAMPIONSHIPS, using a bench rifle with a false muzzle failed to remove the false muzzle before placing the rifle on the bench. Only after capping and cocking the hammer, did he notice the false muzzle was still in place.
This gentleman in one of those brief lapses of common sense, reached out to the muzzle and began to remove the false muzzle. The lightly set trigger jarred loose, the rifle discharged with close to a 200 grain charge of 2FF Goex blackj powder, and a human hand was virtually destroyed.
Today the NMLRA and TMLRA has a range rule requiring ALL fasle muzzles to be secured to the loading bench with a safety line.
I suspect all of us have experienced one of those brief lapses of common sense and afterwards looked upward and said, "thank you for looking out for me".
Since I am the one who started this debate, let me try to stop it. Both sides of this issue have been stated, and neither side is going to be inclined to change or at least admit it.
So we can agree to disagree and move on to other issues.
Best regards,
John L. Hinnant