• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Patterning Pedersoli SxS 12 Ga.

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Mar 27, 2023
Messages
14
Reaction score
11
Location
Virginia
I have been working on a load that works with my pedersoli SxS 12. I loaded 1 1/8 number 6 lead 60 Grains but had donut in middle. Today I made some paper patch 1 3/4 oz shot, pushing it with 70,75,80 2f black powder. all shots were at 35 yards. 2 inch red dot. 14 inch circle. the barrels are extra full and 2 extra full , which makes them hard to load. Do you think this is a good enough pattern?
IMG_0901.jpeg
 

Attachments

  • IMG_0899.jpeg
    IMG_0899.jpeg
    2.5 MB
  • IMG_0896.jpeg
    IMG_0896.jpeg
    2.2 MB
  • IMG_0895.jpeg
    IMG_0895.jpeg
    2.2 MB
  • IMG_0894.jpeg
    IMG_0894.jpeg
    2.5 MB
  • IMG_0893.jpeg
    IMG_0893.jpeg
    2.7 MB
  • IMG_0898.jpeg
    IMG_0898.jpeg
    2.6 MB
  • IMG_0897.jpeg
    IMG_0897.jpeg
    2.6 MB
Some of the patterns hit a bit low but otherwise look fine to me. Go hunt and kill dinner! I know I would.

edit- I would recommend sticking with 80grs though.
 
Yes it is custom. I did not order it but bought it knowing about the chokes. First trigger is tighter choke than second trigger. Its a little hard to work out the loading but a very nice weapon. The shot wrapped in paper cartridge fashon really tightened up the pattern and makes for easy loading.
 
Back
Top