• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

percussion rifle I found laying around my dad's house

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wsmithyv2

32 Cal
Joined
Nov 28, 2022
Messages
3
Reaction score
6
Location
chattanooga tennessee
It is in very poor condition, just want to find out what it is. It has two visible markings on the barrel although the medal is worn down. Behind the hammer it says "MILLS". The barrel goes from an octagonal to straight. No idea on year or anything else.
unnamed (1).jpgIMG_8877.jpg69136769904__D037D485-45CA-4F3B-A409-0B553DC66558.jpgunnamed.jpgIMG_8874.jpgunnamed (2).jpg
 
Last edited:
It might have been made by a highly regarded mid-1800's gun Kentucky gun maker Benjamin Mills, who used back action locks extensively on his target rifles.

Your rifle, however, IMO doesn't look like a target rifle of the period - more like a sporting rifle.
 
I don’t see a rear sight so it could be a shotgun. What does the muzzle look like? The back action lock is typical 1850 or later. Mills was probably the lock maker and not nessasarily the gun maker. Proof marks to me indicates European made.
 
I don’t see a rear sight so it could be a shotgun. What does the muzzle look like? The back action lock is typical 1850 or later. Mills was probably the lock maker and not nessasarily the gun maker. Proof marks to me indicates European made.
It looks like there was a rear sight, there is a slot for one but it is very worn. image.jpgimage.jpg
 
Muzzle looks like a smoothbore, can't see anything that looks like rifling and thin barrel walls too. Odd front sight on it. The profile of the barrel (octagon to round) looks like an old Belgian shotgun I have but without the under rib for the ramrod. The front sight/hood looks like something cobbled up in the shed. At a guess someone was trying to keep an old gun working after it suffered some damage.
 
Back
Top