Powder Dispenser

[Walkabout]

Is there a dispenser available that screws directly onto the original a black powder container? Thanks

 

[BoomStick]

If you mean a spout that screws onto the bottle or can in place of the cap, they are available for most brands. What powder bottle are you using?

 

[Walkabout]

If you mean a spout that screws onto the bottle or can in place of the cap, they are available for most brands. What powder bottle are you using?

Scheutzen and Goex.

 

[BoomStick]

Try here: RMC Powder Can Lids With Spout

 

[Walkabout]

Try here: RMC Powder Can Lids With Spout

Thanks, that's close, but I was hoping to find one that dispenses measured amounts.

 

[stikshooter]

Thanks, that's close, but I was hoping to find one that dispenses measured amounts.

That's what your there for , lots of volume measures available ,buy a couple and see what works for you (I did ) and ended up using weighted charges in stead . Found it easier to use squirrel hunting with pre charged loads ,no wind/shaky (I get excited ) when killing dinner and it makes for less distraction (dry balling) Ed

 

[Grenadier1758]

Some years ago I bought the measure on the left which is just what you want.

I used the cap from the brand of powder I was using and attached the valve to the cap.

Now, all I can find is this flask with the valve and adjustable measure.

https://www.midwayusa.com/product/1023140946?pid=637942
I have seen just the valve that is compatible with most 1/2" adjustable powder measures. You can use the lid from your powder can to hold the valve. Now I can't find it. They certainly existed.

 

[Grenadier1758]

Found the valve that is compatible with most 1/2" adjustable measures.

https://rmcoxyoke.com/product/rmc-safety-valve-cap/

 

[Buckskinquin]

I bought this years ago. Probably from Dixie

 

[Johnny Tremain]

We use a old lid and a 5.56 case. Cut the base off, split the bottom 4-6 times, drill a hole in the lid, stuff the case thru and peen the bottom to the case to the lid. Some use rod and flux and seal the two together.

I have two of these made in the 90s.

Also use it to fill my powder horns

 

[CaptainVane]

I saw one that screwed on a Triple 7 jar, went to buy it a month later and can’t find it now.