Powder flask with a compartment for bullets

[toot]

earth magnets,and again just what is their purpose in the horn? and what do they look like? I want to get some.

 

[Feltwad]

Enclose are images of horn powder and shot flask .
Feltwad

 

[Grimord]

thanks for the come back. but where does one get them?

I bought mine at Harbor Freight. You can also find them on line. As an aside, I purchased.(from Harbor Freight) some of their rare earth magnets that have a hole in the center like a 3/8" dia washer about 1/16" thick. I use one of these magnets as a ghost ring sight on my flint lock squirrel rifle. I stick the magnet onto the rear sight. Works well for my old eyes that don't see the sights so well anymore.

 

[user 43911]

thanks for the come back. but where does one get them?

Home depot has them

 

[Grimord]

earth magnets,and again just what is there purpose in the horn? and what do they look like? I want to get some.

In the horn I made, I recessed and glued two of the magnets into the wooden base of the horn. Then I made a wooden ball block the same shape of the base of the horn and recessed and glued two more magnets into it so that they lined up with the ones in the horn base, and were magnetic opposite poles. The ball block base is stuck to the horn base, and has to be pushed off to the side to release the ball block base. Very convenient for hunting.

 

[toot]

hey guys thanks for responding to my query that I asked. a rely great group of guys! best and stay safe.

 

[JamesClassJr]

Very interesting!

 

[Andrey22]

Soldered the nose to the top cover.

 

[Andrey22]

Spring, shutter and lever of the dispenser of the top cover.
First fitting

 

[Carbon 6]

what are two RARE EARTH MAGNETS?

https://en.wikipedia.org/wiki/Neodymium_magnet

thanks for the come back. but where does one get them?

You should be able to find then at your local hardware store or they can be ordered off Amazon or other internet sellers.

 

[Gun Tramp]

Fantastic work, Andrey. Thanks for sharing.

 

[Andrey22]

Made and soldered a suspension ring to the top cover.

 

[Andrey22]

Made a ring for the bottom cover

 

[Andrey22]

Soldered and shaped the top valve cover

 

[Andrey22]

Soldered the bottom to the bottom ring

 

[Andrey22]

I made a tube on a lathe for storing bullets and a plug for this tube

 

[Andrey22]

I tried on and made a valve for bullet compartment

 

[Grimord]

You are far more talented than i will ever be. I have never had much luck working with metal. Can't wait to see the final product.

 

[Andrey22]

Thank you, but unfortunately I often lack patience

 

[Andrey22]

Soldering of the bottom