- Joined
- Jan 24, 2005
- Messages
- 3,269
- Reaction score
- 6,619
That’s my story anyway
Was doing a bit of cleaning out and I came across this forgotten project.
The plug is in two pieces, I fitted aplug, glued and pinned it (as usual), then sanded it and the horn flat then glued on the domed finishing piece.
The brass center pin will be drilled out to take a strong leather thong.
It’s clear enough to see the powder when there’s some in there. Was going to drop the bore light inside but couldn’t find it, so put it up against a torch.Will definitely finish this now that it’s ‘come home’.
Length is 10 inches along the outer curve and 2 1/2 at the pins.
Was doing a bit of cleaning out and I came across this forgotten project.
The plug is in two pieces, I fitted aplug, glued and pinned it (as usual), then sanded it and the horn flat then glued on the domed finishing piece.
The brass center pin will be drilled out to take a strong leather thong.
It’s clear enough to see the powder when there’s some in there. Was going to drop the bore light inside but couldn’t find it, so put it up against a torch.Will definitely finish this now that it’s ‘come home’.
Length is 10 inches along the outer curve and 2 1/2 at the pins.